Literature cited
S. G. Babaev, A. M. Ganiev, and I. A. Danielyan, Approaches to the Increase in Efficiency of Cutter Bit Bearings [in Russian], VNIIOENG, Moscow (1972).
S. A. Postash, Improving the Reliability and Efficiency of Cutter Bits [in Russian], Nedra, Moscow (1982).
A. I. Popenov, Jamming of Pumping Solids in Cutter Bit Bearings. Technology of Drilling of Oil and Gas Wells [in Russian], Ufa (1982), pp. 134–136.
V. V. Simonov and V. G. Vyskrebtsov, Performance of Cutter Bits and Their Improvement [in Russian], Nedra, Moscow (1975).
N. A. Zhidovtsev, K. B. Katsov, G. V. Karpenko, et al., Durability of Drilling Bits [in Russian], Naukova Dumka, Kiev (1979).
N. A. Nasibov, “Selection of a criterion for the jamming in kinematic pairs,” Uchen. Zap. Vyssh. Uchebn. Zaved. AzSSR, Ser. 9, No. 7, 69–72 (1974).
N. A. Nasibov, “Occurrence of jamming in the supports of single-cutter bits,” Izv. Vyssh. Uchebn. Zaved., Ser. Neft' Gaz, No. 4, 105–107 (1977).
N. A. Nasibov, “Jamming in a progressive kinematic pair,” Izv. Vyssh. Uchebn. Zaved., Ser. Mashinostr., No. 7, 45–48 (1979).
N. A. Nasibov, “Determination of the jamming friction coefficient in friction pairs of mechanisms,” Izv. Vyssh. Uchebn. Zaved., Ser. Mashinostr., No. 3, 39–43 (1980).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 7, pp. 12–13, July, 1987.
Rights and permissions
About this article
Cite this article
Nasibov, N.A. Loss of self-adjustment of the rotation-supporting roller of drilling bits. Chem Petrol Eng 23, 330–332 (1987). https://doi.org/10.1007/BF01149943
Issue Date:
DOI: https://doi.org/10.1007/BF01149943