Literature cited
H. D. Marsch, R. P. Hitzschke, and H. P. Hartuigsen, “Bestandigkeit verschiedener stahle und nikelbasiswerkstoffe unter dem einflub aufnitrierend wirkender gase in der ammoniaksynthese,” Z. Werkstoff.,15, No. 6, 191–192 (1984).
V. D. Sadovskii, “Method of observing the dislocation structure in alloy KhN77TYuR,” in: Investigation of Steels and Alloys [in Russian], Nauka, Moscow (1964), pp. 322–325.
G. V. Makhanek, “Metallographic examination of the dislocation structure,” Dissertation for Candidate of Technical Sciences, Sverdlovsk (1966).
M. M. Steinberg, M. A. Smirnov, A. M. Tolstov, et al., “Effect of the type of thermomechanical treatment on the structure, phase composition, and hardening of steel KXh18N10T,” in: Improving the Structural Strength of Steels and Alloys [in Russian], No. 2, Mosk. Dom Nauchno-Tekh. Propagandy Imeni F. É. Dzerzhinskii, Moscow (1970). pp. 202–207.
M. A. Smirnov, Yu. P. Bulanov, and G. V. Kuznetsova, “Certain characteristic features of carbide segregation in deformed austenitic steels,” Fiz. Met. Metalloved.,41, No. 2, 397–401 (1976).
M. A. Smirnov, A. M. Tolstov, Yu. P. Bulanov, et al., “The phase composition and properties of deformed steel 12Kh18N10T after prolonged heatings,” Metalloved. Term. Obrab. Met., No. 1, 29–32 (1979).
R. C. Wasielewski and M. R. Louthan, “Hydrogen embrittlement of AISI316 stainless steel,” in: Corrosion — Microstructural and Metallographic. Proceedings of the 16th Annual Technical Meeting of the International Metallography Society, Calgary (1983), pp. 23–26.
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 4, pp. 30–32, April, 1987.
Rights and permissions
About this article
Cite this article
Shapiro, M.B., Surkov, Y.P., Chizhmakov, M.B. et al. Causes for the failure of water-heater pipes in ammonia production. Chem Petrol Eng 23, 190–193 (1987). https://doi.org/10.1007/BF01149344
Issue Date:
DOI: https://doi.org/10.1007/BF01149344