Literature cited
V. M. Vlasov, K. P. Seleznev, L. Ya. Strizhak, and I. P. Suslina, “Automated alternative calculation of the flow-through part of high-pressure compressors,” Dispatch in the Central Scientific and Technical Research Institute of Petrochemical Engineering, No. 1783-KhN87, December 29, 1987.
V. A. Zagoruchenko, R. N. Bikchentai, A. A. Vasserman, et al., Thermotechnical Calculation of Natural Gas Transfer and Regasification Processes [in Russian], Nedra, Moscow (1980).
Dzh. Shul'ts, “Polytropic analysis of a centrifugal compressor,” énerg. Mashinostr., No. 1, 87–100 (1962).
A. N. Vasil'ev, Yu. B. Lade, N. I. Sadovskii, and L. Ya. Strizhak, “Method of experimental study of high-pressure centrifugal compressor stages on a closed loop test stand,” Dispatch in the Central Institute of Scientific and Technical Research of Petrochemical Engineering, No. 1447-KhM85.
Inventor's Certificate No. 1,112,152 SSSR, MKI F 04 D 29/28, Centrifugal compressor impeller.
Inventor's Certificate No. 1,437,579 SSSR, MKI F 04 D 17/08, Centrifugal compressor.
Yu. B. Lade and L. Ya. Strizhak, “Investigation of gas flow and losses in a vaneless diffuser and turning bend,” in: Hydrodynamics of High Velocities [in Russian], Krasnoyarsk Polytechnical Institute, Krasnoyarsk (1986), pp. 162–169.
K. P. Seleznev and Yu. B. Galerkin, Centrifugal Compressors [in Russian], Mashinostroenie, Moscow-Leningrad (1982).
A. N. Vasil'ev, V. M. Vlasov, N. I. Sadovskii, and L. Ya. Strizhak, “Effect of Reynold's number on characteristics of low-discharge impellers with differing surface roughness and diffuser effect of the between blades channels,” in: Working Processes of Compressors and Compressor Installations with ICE [in Russian], Leningrad Polytechnical Institute, Leningrad (1987), pp. 19–23.
V. M. Vlasov, N. I. Sadovskii, K. P. Seleznev, and L. Ya. Strizhak, “Determination of energy characteristics of low-discharge stages of high-pressure centrifugal compressors based on the viscous flow model,” in: Development of Compressors and Compressor Installations which Provide for Intensive Growth in the Fields of Energy Fuel Systems, Materials of the 8th All-Union Scientific and Technical Conference on Compressor Engineering, Sumy (1991), pp. 27–40.
A. V. Gerasimov, The Structure of Flow and Losses in Centrifugal Compressor Impellers Profiled Using the Method of the Leningrad Polytechnical Institute, Dissertation for Degree of Candidate of Technical Sciences, Leningrad Polytechnical Institute, Leningrad (1983).
Senu, Kinoshita, and Ishiba, “Asymmetric flow in vaneless diffusers of centrifugal compressors,” Teoret. Osn. Inzh. Rasch., No. 1, 204–215 (1977).
G. N. Den, Mechanics of Flow in Centrifugal Compressors [in Russian], Mashinostroenie, Leningrad (1973).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 2, pp. 9–13, February, 1992.
Rights and permissions
About this article
Cite this article
Strizhak, L.Y. Improvement in the flow-through part of high-pressure centrifugal compressors. Chem Petrol Eng 28, 85–91 (1992). https://doi.org/10.1007/BF01148827
Issue Date:
DOI: https://doi.org/10.1007/BF01148827