Literature cited
N. I. Moskvin, A. L. Belinkii, and M. M. Kristal', “The influence of cold plastic deformation and heat treatment on the structure and properties of Kh15N9Yu steel,” Metalloved. Term. Obrab. Met., No. 10, 12–15 (1964).
S. M. Altukhov and V. A. Rumyantsev, Membrane Compressors [in Russian], Mashinostroenie, Moscow (1967).
T. V. Pryanichnikova, Z. A. Vashchenko, and A. P. Kokko, “The influence of microstructure and heat treatment on the yield strength of Kh15N9Yu steel,” Metalloved. Term. Obrab. Met., No. 6, 23–26 (1978).
V. A. Pchelintsev, V. G. Marchenko, and L. A. Sosnovskii, “The influence of the structural condition of sheet of Kh15N9Yu steel on the strength and fatigue properties,” Vest. Mashinostr., No. 6, 78–79 (1976).
V. A. Pchelintsev, V. G. Marchenko, and E. A. Savchenko, “The stability of the mechanical properties of materials for the elastic elements of compressor machinery,” in: Scientific Proceedings of the All-Union Scientific-Research Institute for Compressor Machinery on “The Design, Investigation, Technology, and Organization of Production of Compressor Machinery” [in Russian] (1978), pp. 83–87.
Ya. M. Potak, High-Strength Steels [in Russian], Metallurgiya, Moscow (1972).
V. L. Aleksandrov, I. I. Bogachev, and R. I. Mints, “The question of the resistance of austenitic steels under cyclic loading,” Fiz. Met. Metalloved.,22, No. 5, 737–743 (1966).
V. G. Gorbach, Yu. A. Avetisyan, and P. M. Kozlov, “The transformation of austenite into martensite in cyclic deformation,” Fiz. Met. Metalloved.,40, No. 6, 1216–1222 (1975).
N. G. Orekhov, L. M. Pevzner, A. S. Tarantova, and S. G. Kishkin, “The deformation aging of high-strength steels,” Metalloved. Term. Obrab. Met., No. 10, 46–52 (1969).
F. F. Khimushin, “The cold deformation of stainless steel,” Kachest. Stal', No. 4, 36–47 (1934).
V. M. Kondratov, “Internal friction in martensitic aging Fe-Cr-Ni steels,” Probl. Prochn., No. 5, 18–23 (1971).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 6, pp. 19–21, June, 1980.
Rights and permissions
About this article
Cite this article
Pchelintsev, V.A., Tananko, I.A. & Emel'yanova, N.V. Technical requirements for a material for elastic elements of compressors. Chem Petrol Eng 16, 348–352 (1980). https://doi.org/10.1007/BF01148509
Issue Date:
DOI: https://doi.org/10.1007/BF01148509