Literature cited
I. I. Kukolevskii and O. V. Baibakov, “Screw pumps with screws of special profile,” in: Hydraulic Machine Building [in Russian], Mashgiz, Moscow (1963), pp. 5–27.
GOST 20572-75, Double-Screw Pumps [in Russian], Standartov, Moscow (1977).
V. L. Kalishevskii and V. M. Ryazantsev, “Investigation of the characteristics of a double-screw pump with sealed coupling,” Khim. Neft. Mashinostr., No. 2, 14–16 (1977).
V. M. Ryazantsev and P. V. Kurilekh, “Investigation of the effect of the ratios between the areas of the protrusions and depressions of the initial cross section of the screws of a triple-screw pump on its external characteristics,” Trudy VNIIgidromash, No. 45, 131–139 (1974).
V. M. Ryazantsev, “Shaping of the screws and the cutting instrument for double-screw pumps, hydraulic motors, and counters with a sealed coupling of the screws,” Express-Informatsiya TsNIITIkhimneftemasha, Ser. KhM-4, No. 2 (1974).
V. L. Kalishevskii, V. M. Ryazantsev, and N. I. Kiseleva, “Analysis of the power characteristics of double-screw pumps with different couplings,” Khim. Neft. Mashinostr., No. 1, 17–20 (1977).
V. M. Ryazantsev, “Shaping of screws and machining instrument for double-screw pumps,” Trudy VNIIgidromash, 132–142 (1977).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 6, pp. 7–8, June, 1980.
Rights and permissions
About this article
Cite this article
Ryazantsev, V.M. Profile of single-cut screws of double-screw pumps. Chem Petrol Eng 16, 322–324 (1980). https://doi.org/10.1007/BF01148501
Issue Date:
DOI: https://doi.org/10.1007/BF01148501