Literature cited
M. T. Gusman et al., Screw-Type Downhole Motors for Well Drilling [in Russian], Nedra, Moscow (1981).
A. B. Tsepkov and A. M. Kochnev, “Tool profiling for fabrication of eccentric cycloidal gearing,” Stanki Instr., No. 2, 35–37 (1972).
A. M. Kochnev and A. V. Tsenkov, “Choice of geometric parameters for eccentric internal cycloidal gearing,” Vestn. Mashinostr., No. 5, 28–30 (1980).
D. F. Baldenko, A. M. Kochnev, S. S. Nikomarov, et al., “Determination of working area of multithread helicoidal rotor mechanisms,” Vest. Mashinostr., No. 2, 37–39 (1978).
A. V. Tsepkov, Profiling Form-Relieved Tools [in Russian], Mashinostroenie, Moscow (1979).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 12, pp. 10–11, December, 1989.
Rights and permissions
About this article
Cite this article
Korotaev, Y.A., Tsepkov, A.V. & Kochnev, A.M. Calculation of principal geometric parameters for multithread helicoidal rotor mechanism of screw-type downhole motor. Chem Petrol Eng 25, 678–681 (1989). https://doi.org/10.1007/BF01147852
Issue Date:
DOI: https://doi.org/10.1007/BF01147852