This is a preview of subscription content, log in via an institution to check access.
Literature cited
Yu. B. Shuvalov and V. A. Kurenkov, “Hollow uniform-strength core for manufacturing pipes with sharp bends and Dn = 150–600 mm,” in: Technology for Manufacturing and Erecting Tanks and Pipelines [in Russian], VNIIMontazhspetsstroi, Moscow (1986), pp. 7–13.
Yu. B. Shuvalov, R. I. Tavastsherna, and V. A. Kurenkov, “Stresses in the core during drawing of thick-walled pipes with sharp bends,” Khim. Neft. Mashinostr., No. 5, 17–18 (1985).
Yu. B. Shuvalov and R. I. Tavastsherna, “Method of determining the deformation force during hot drawing of pipes with sharp bends,” Khim. Neft. Mashinostr., No. 9, 40 (1984).
N. M. Belyaev, Strength of Materials [in Russian], Gos. Izd-vo Tekhniko-Teor. Lit., Moscow (1953).
M. V. Storozhev and E. A. Popov, Theory of Metal Working under Pressure [in Russian], Mashinostroenie, Moscow (1971).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 2, pp. 36–37, February, 1991.
Rights and permissions
About this article
Cite this article
Shuvalov, Y.B. Hot drawing of pipes with sharp bends on hollow horn-type cores. Chem Petrol Eng 27, 111–112 (1991). https://doi.org/10.1007/BF01147675
Issue Date:
DOI: https://doi.org/10.1007/BF01147675