Literature cited
V. I. Zyuzin and A. V. Tret'yakov, The Theory of Rolling (Handbook) [in Russian], Metallurgiya, Moscow (1982).
S. Ya. Veiler and V. I. Likhtman, The Action of Lubricants in Working of Metals by Pressure [in Russian], Izd, Akad. Nauk SSSR, Moscow (1960).
S. I. Kovalev, V. I. Savenko, and E. D. Shchukin, “Mathematical simulation of the influence of an active lubricant on the stressed state of the material in rolling of thin foils,” Fiz.-Khim. Mekh. Mater., No. 6, 36–40 (1983).
S. I. Kovalev and V. I. Savenko, “The influence of adsorption plastification on the stressed state of the metal in rolling of strip,” in: The Plastic Deformation of Light and Special Alloys [in Russian], Vol. 2, Metallurgiya, Moscow (1982), pp. 143–148.
T. Yu. Lyubimova, “The influence of adsorption from the surrounding medium on the degree of work hardening of metals in periodic surface deformation,” Zh. Tekh. Fiz.,20, No. 11, 1334–1343 (1950).
A. I. Tselikov and A. I. Grishkov, The Theory of Rolling [in Russian], Metallurgiya, Moscow (1970).
S. I. Kovalev, N. I. Koryagin, and I. V. Shirko, The Stresses and Strains in Flat Rolling [in Russian], Metallurgiya, Moscow (1982).
V. N. Vydrin, A. S. Fedosienko, and V. I. Krainov, The Process of Continuous Rolling [in Russian], Metallurgiya, Moscow (1970).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 21, No. 5, pp. 36–39, September–October, 1985.
Rights and permissions
About this article
Cite this article
Kovalev, S.I., Savenko, V.I. & Shchukin, E.D. Influence of the surface layer rheology of adsorption-plasticized strip on the stressed and strained state of the material in rolling. Mater Sci 21, 429–432 (1985). https://doi.org/10.1007/BF01147588
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01147588