Literature cited
L. V. Petrash, Quenchants [in Russian], Mashgiz, Moscow (1959).
M. G. Kurmashov, “The use of quenchants with an intermediate cooling rate,” in: Proceedings of the S. M. Kirov Kazan Chemical Technology Institute [in Russian], No. 42 (1971), pp. 130–135.
A. L. Nemchinskii, Thermal Calculations for Heat Treatment [in Russian], Sudpromgiz, Moscow-Leningrad (1953).
M. M. Zamyatin and N. V. Zimin, “An investigation of quenching after induction heating,” in: Proceedings of the All-Union Scientific-Research Institute for High Frequency-Currents [in Russian], No. 7, Mashinostroenie, Moscow-Leningrad (1966), pp. 214–221.
K. Z. Shepelyakovskii, The Strengthening of Machine Parts by Surface Hardening with Induction Heating [in Russian], Mashinostroenie, Moscow (1972).
Yu. P. Adler, An Introduction to Experiment Planning [in Russian], Metallurgiya, Moscow (1969).
M. G. Kurmashov, “Self-tempering of stepped shafts in water-air hardening by the continuous-successive method,” Khim. Neft. Mashinostr., No. 6, 29–31 (1982).
M. G. Kurmashov, “Water-air hardening of pump and compressor parts,” in: Improving Chemical Machinery Building Technology [in Russian], Proekt.-Konstr. Tekh. Byuro Khim. Neft. Mashinostr., Perm' (1979), pp. 128–133.
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No.5, pp. 35–36, May, 1985.
Rights and permissions
About this article
Cite this article
Kurmashov, M.G., Sapunov, K.N. & Kurmashev, R.M. Induction hardening of parts with water-air mixtures with automatic control of quenching. Chem Petrol Eng 21, 253–255 (1985). https://doi.org/10.1007/BF01147571
Issue Date:
DOI: https://doi.org/10.1007/BF01147571