This is a preview of subscription content, log in via an institution to check access.
Literature cited
N. D. Shcherbyuk and N. V. Yakubovskii, Threaded Joints of Pipes for the Oil Industry and Bottom Motors [in Russian], Nedra, Moscow (1974).
A. E. Saroyan, Drilling Columns for Deep Drilling [in Russian], Nedra, Moscow (1979).
D. Yu. Mochernyuk, Investigations and Calculation of Threaded Joints of Pipes Used in the Oil and Gas Extracting Industry [in Russian], Nedra, Moscow (1970).
A. E. Saroyan and M. A. Subbotin, Operation of Columns of Pump and Compressor Pipes [in Russian], Nedra, Moscow (1985).
W. P. Schneider, “Casing and tubing connection stresses,” J. Pet. Technol., No. 8, 1851–1862 (1982).
A. E. Saroyan, N. D. Shcherbyuk, N. V. Yakubovskii, et al., Pipes for the Oil Industry: Handbook [in Russian], Nedra, Moscow (1981).
S. F. Bilyk, Tightness and Strength of Conical Threaded Joints of Pipes for the Oil Industry [in Russian], Nedra, Moscow (1981).
V. I. Kuts, “Effect of the frictional properties of threaded joints on the surface of pump and compressor pipes on their ability to be assembled by mechanical spanners,” Khim. Neft. Mashinostr., No. 1, 5–7 (1990).
V. I. Kuts, “Investigation of the screwing together and unscrewing of pump and compressor pipes in the course of the experimental application of the spanner APR-2VBM,” Khim. Neft. Mashinostr., No. 2, 6–8 (1990).
N. G. Kurbanov, É. K. Shakhbazov, and S. K. Gadzhiev, Improvement of the Operational Reliability of Mechanical Spanners for Pipes for the Oil Industry, Review of Information [in Russian], TsINTIkhimneftemash, Moscow (1986).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 3, pp. 4–6, March, 1990.
Rights and permissions
About this article
Cite this article
Kuts, V.I. Determination of the optimal torque in screwing together threaded joints of pump and compressor pipes. Chem Petrol Eng 26, 124–126 (1990). https://doi.org/10.1007/BF01147400
Issue Date:
DOI: https://doi.org/10.1007/BF01147400