This is a preview of subscription content, log in via an institution to check access.
Literature cited
RTM 26-01-28-69. Use of Steels for Parts in High-Pressure Pipelines for the Production of Ammonia or Methanol [in Russian], IrkutskNIIkhimmash (1969).
TU 26-01-254-68. Forgings of Pipeline Parts with Internal Diameters from 250 to 400 mm, for a Pressure of 320 kgf/cm2 [in Russian], IrkutskNIIkhimmash (1969).
RTM 26-01-44-71. Pipeline Parts for a Pressure from 100 to 1000 kgf/cm2. Construction Norms and Strength Design Methods [in Russian], IrkutskNIIkhimmash (1971).
ON 26-01-146-69 — ON 26-01-174-69. Pipeline Parts with Internal Diameters from 250 to 400 mm, for Pressures of 250 and 320 kgf/cm2 [in Russian], IrkutskNIIkhimmash (1969).
ON 26-01-100-69 — ON 26-01-124-69. Pipeline Parts for a Pressure of 2500 kgf/cm2 [in Russian], IrkutskNIIkhimmash (1969).
ON 26-01-91-69 — ON 26-01-98-69. Pipeline Parts, Welded, for Pressures of 200 and 320 kgf/cm2 (20 and 32 MN/m2) [in Russian], IrkutskNIIkhimmash (1968).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 4, pp. 5–6, April, 1975.
Rights and permissions
About this article
Cite this article
Khismatulin, E.R., Neiman, E.Y. High pressure pipelines for large tonnage chemical manufacturing. Chem Petrol Eng 11, 297–300 (1975). https://doi.org/10.1007/BF01144746
Issue Date:
DOI: https://doi.org/10.1007/BF01144746