Literature cited
V. D. Myagkov, Brief Handbook for Constructors [in Russian], Mashgiz, Moscow-Leningrad (1963).
Sh. M. Bilik, The Macrogeometry of Machine Parts [in Russian], Mashinostroenie, Moscow (1973).
M. A. Palei, Deviation of the Form and Arrangement of Surfaces [in Russian], Standartov, Moscow (1965).
A. A. Shishkin, “Investigation of the effect of technological factors on the quality of a pipeline valve fitting,” Khim. Neft. Mashinostr., No. 8, 31–32 (1972).
Ya. A. Tunik, “The calculation of batch-type flat metallic seals,” in: Fitting Building, No. 1 [in Russian] (1972), pp. 47–53.
I. Yu. Smirnov, “The sealing of the valve-seat pair of a pneumatic fitting,” in: Optimization and Automation of Constructional Work, No. 21 [in Russian], Tula Polytechnic Institute, Tula (1973), pp. 124–137.
L. H. Pearson, The Design of Valves and Fittings, London (1964).
Brief Metal Worker's Handbook [in Russian] (edited by A. N. Malov), Mashinostroenie, Moscow (1972).
N. B. Demkin, Contacting of Rough Surfaces [in Russian], Izd. Nauka, Moscow (1970).
Z. M. Levina and D. N. Reshetov, The Contact Rigidity of Machines [in Russian], Mashinostroenie, Moscow (1971).
D. F. Gurevich, Calculation and Construction of Pipeline Fittings [in Russian], Mashinostroenie, Moscow -Leningrad (1969).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 7, pp. 37–38, July, 1977.
Rights and permissions
About this article
Cite this article
Mendel'son, D.A. Effect of sealing surface deformations on the sealing force of a shut-off device. Chem Petrol Eng 13, 649–652 (1977). https://doi.org/10.1007/BF01144128
Issue Date:
DOI: https://doi.org/10.1007/BF01144128