Abstract
Plasma-sprayed ceramic coatings applied to metal components have uses in many diverse fields, including aerospace, electronics and, more recently, biomaterials. In all such applications success of the component relies on adequate bonding between the ceramic coating and metal substrate. In this study, a convenient and reliable test method to assess the fracture toughness of this metal/ceramic interface was developed by modifying an existing homogeneous short-bar configuration. Additionally, conventional tensile adhesive bond strength testing was conducted. For the alumina-coated Ti-6Al-4V model system studied, an interface toughness value of 1.84±0.20 MPa m1/2 was obtained. An interfacial tensile bond strength of 13.6±2.9 MPa was also measured for this system. Further refinement of this modified short bar technique taking into account experimental compliance behaviour and potential complex or mixed-mode stress intensities is needed to confirm these preliminary toughness values, which nevertheless offer a potentially more sensitive means of monitoring the mechanical integrity of this metal/ceramic interface.
Similar content being viewed by others
References
I. Kvernes, M. Espeland andO. Norholm,Scand. J. Metall. 17 (1988), 8.
K. T. Scott, in “Ceramic Surfaces and Surface Treatments” (British Ceramic Society, Shelton, 1984) p. 195.
P. Chagnon andP. Fauchais,Ceram. Int. 10 (4) (1984) 119.
R. C. Tucker, in “Deposition Technologies for Films and Coatings”, edited by R. F. Bunshah (Noyes, Park Ridge, 1982) p. 454.
C. C. Berndt andR. McPherson,Aust. Weld. Res. 6 (1979) 75.
P. Ostojic andC. C. Berndt,Surf. Coat. Technol. 34 (1) (1988) 43.
C. C. Berndt, in “Advances in Fracture Research”, Vol. 4, edited by S. R. Valluri, B. M. R. Taplin, P. Rama Rao, J. F. Knott and R. Dubey (Pergamon Press, Oxford, 1984) p. 2553.
D. A. Gerdeman andN. L. Hecht, “Arc Plasma Technology in Materials Science” (Springer-Verlag, New York, 1972) p. 9.
W. Diem, G. Elssner, T. Suga andG. Petzow, in “Adhesive Joints: Formation, Characteristics, and Testing”, edited by K. L. Mittal (Plenum Press, New York, 1984) p. 871.
D. S. Rickerby,Surf. Coat. Technol. 36 (1988) 541.
H. S. Ingham, in “Adhesion Measurement of Thin Films, Thick Films, and Bulk Coatings”, ASTM STP 640, edited by K. L. Mittal (American Society for Testing and Materials, Philadelphia, PA, 1978) p. 285.
E. Lopez, F. Beltzung andG. Zambelli,J. Mater. Sci. Lett. 8 (1989) 346.
General specification, ASTM D3359 (American Society for Testing and Materials, Philadelphia, PA, 1983).
M. J. Filiaggi, N. A. Coombs andR. M. Pilliar,Mater. Res. Soc. Symp. Proc. 153 (1989) 377.
C. C. Berndt, in “Ultrastructure Processing of Ceramics, Glasses, and Composites”, edited by L. L. Heich and D. R. Ulrich (Wiley, New York, 1984) p. 524.
C. C. Berndt andR. McPherson, in “Surfaces and Interfaces in Ceramic and Ceramic-Metal Systems”, edited by J. Pask and A. Evans (Plenum Press, New York, 1981) p. 619.
C. C. Berndt, in “Advances in Fracture Research”, Vol. 4, edited by S. R. Valluri, B. M. R. Taplin, P. Rama Rao, J. F. Knott and R. Dubey (Pergamon Press, Oxford, 1984) p. 2545.
G. N. Heintze andR. McPherson,Surf. Coat. Technol. 34 (1988) 15.
Idem, ibid. 36 (1988) 125.
P. Ostojic andR. McPherson,J. Amer. Ceram. Soc. 71 (1988) 891.
C. Colin, M. Boussuge, D. Valentin andG. Desplanches,J. Mater. Sci. 23 (1988) 2121.
M. K. Ferber andS. D. Brown, in “Fracture Mechanics of Ceramics”, Vol. 6, edited by R. C. Bradt, A. G. Evans, D. P. H. Hasselman and F. F. Lange (Plenum Press, New York, 1983) p. 523.
M. K. Ferber, PhD thesis, University of Illinois at Urbana-Champaign (1981).
J. C. Newman, in “Chevron-notched specimens: Testing and Stress Analysis”, ASTM STP 855, edited by J. H. Underwood, S. W. Freiman and F. I. Baratta (American Society for Testing and Materials, Philadelphia, PA, 1984) p. 5.
D. H. Sherman,Metals Handbook 8 (1985) 468.
K. R. Brown,ASTM Standard News 16 (11) (1988) 66.
D. Munz, R. T. Bubsey andJ. E. Srawley,Int. J. Fract. 16 (1980) 359.
L. M. Barker,Engng. Fract. Mech. 9 (1977) 361.
Idem, Int. J. Fract. 15 (1979) 515.
J. J. Melcholsky andL. M. Barker, in “Chevronnotched Specimens: Testing and Stress Analysis”, ASTM STP 855, edited by J. H. Underwood, S. W. Freiman and F. I. Baratta (American Society for Testing and Materials, Philadelphia, PA, 1984) p. 324.
L. M. Barker,Eng. Fract. Mech. 17 (1983) 289.
S. Safai andH. Herman, in “Advances in Surface Coating Technology”, edited by J. C. Anderson (The Welding Institute, Cambridge, 1978) p. 1.
D. J. Varacelle,Mater. Res. Soc. Symp. Proc. 121 (1988) 541.
V. Wilms andH. Herman,Thin Solid Films 39 (1976) 251.
S. D. Brown, J. L. Drummond, M. K. Ferber, D. P. Reed andM. R. Simon, in “Mechanical Properties of Biomaterials”, edited by G. W. Hastings and D. F. Williams (Wiley, Chichester, 1980) p. 249.
J. E. Randall andD. Dowson,Engng. Med. 13 (2) (1984) 67.
F. Gitzhofer, personal communication, University of Sherbrooke, Quebec (1989).
P. O. Charreyron, N. J. Bylina andJ. G. Hannoosh, in “Fracture Mechanics of Ceramics”, Vol. 8, edited by R. C. Bradt, A. G. Evans, D. P. H. Hasselman and F. F. Lange (Plenum Press, New York, 1986) p. 225.
T. Suga andG. Elssner,J. de Phys. 46 (C4) (1985) 657.
J. R. Rice,J. Appl. Mech. 55 (1988) 98.
H. T. Corten, in “Fracture: An Advanced Treatise”, Vol. VII, edited by H. Liebowitz (Academic Press, New York, 1972) p. 675.
F. Erdogan,J. Appl. Mech. 32 (1965) 403.
A. G. Evans andJ. W. Hutchinson,Acta Metall. 37 (1989) 909.
E. Bardal, P. Molde, andT. G. Eggen,Brit. Corros. J. 8 (1973) 15.
F. J. Hermanek,Weld. J. 57 (11) (1978) 31.
P. Boch, P. Fauchais, D. Lombard, B. Rogeaux andM. Vardelle, in “Science and Technology of Zirconia II”, edited by N. Claussen, M. Ruhle and A. H. Heuer (American Ceramic Society, Columbus, 1984) p. 488.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Filiaggi, M.J., Pilliar, R.M. Mechanical testing of plasma-sprayed ceramic coatings on metal substrates: Interfacial fracture toughness and tensile bond strength. J Mater Sci 26, 5383–5395 (1991). https://doi.org/10.1007/BF01143236
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01143236