Literature cited
N. M. Novozhilov, Metallurgical Aspects of Arc Welding with Active Shielding Gases [in Russian], Mashinostroenie, Moscow (1972).
I. K. Pokhodnya, Gases in Welds [in Russian], Mashinostroenie, Moscow (1972).
K. V. Vasil'ev, L. O. Kokhlikyan, N. K. Pliska, and N. G. Guseinov, Plasma-Arc Cutting in Engineering. Reference Literature on Flame Cutting of Metals [in Russian], Vol. 24, TsIN TIkhimneftemash, Moscow (1967).
K. A. Vasil'ev and L. O. Kokhlikyan, “Study of the thermal effects of plasma-arc cutting on the metal at the edges,” in: Thermal Cutting, Surfacing, Welding Equipment [in Russian], Vol. 17, Mashinostroenie, Moscow (1969), pp. 86–101.
K. V. Vasil'ev and L. O. Kokhlikyan, “The cast layer in the thermally affected zone and hydromechanics of plasma-arc cutting,” Avt. Svarka, No. 9, 32–36 (1973).
L. O. Kokhlikyan, “Possibility of eliminating porosity in welds made after edge preparation by airplasma cutting,” in: Autogenous Engineering [in Russian], Vol. 1, TsIN TIkhimneftemash, Moscow (1973), pp. 2–4.
K. V. Vasil'ev, N. G. Guseinov, and N. I. Nikiforov, “Arc voltage during manual air-plasma cutting,” Avt. Svarka, No. 2, 25–26 (1973).
Additional information
Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 6, pp. 22–24, June, 1974.
Rights and permissions
About this article
Cite this article
Kokhlikyan, L.O., Vasil'ev, K.V. & Bychkov, A.S. Reducing the porosity of welds made after edge preparation by air-plasma cutting. Chem Petrol Eng 10, 521–524 (1974). https://doi.org/10.1007/BF01137943
Issue Date:
DOI: https://doi.org/10.1007/BF01137943