Abstract
Systematic studies have been made of the grain growth and density of sintered ZnO-based systems containing one or more additive oxides of the type Nb2O5, Bi2O3, Sb2O3, CoO, Cr2O3, MnO2, NiO and Al2O3. These samples were characterized using such techniques as scanning electron microscopy, X-ray diffraction and electron probe microanalysis. The influence of the nature and amount of additive oxides and sintering temperature is discussed in relation to microstructure, density and the phases present.
Similar content being viewed by others
References
E. C. Sakshaug, J. S. Kresge andS. A. Miske Jr,IEEE Trans. Power Appar. Syst. PAS-96 (1977) 647.
K. Nakano andJ. Ozawa,Hitachi Rev. 33 (3) (1984) 157.
S. Tominaga, Y. Shibuya, Y. Fujiwara andT. Nitta,IEEE PES summer meetingA78 (1978) 595.
M. Kobayashi, M. Mizuno, T. Aizawa, M. Hayashi andK. Mitani,ibid. F77 (1977) 682.
M. Matsuoka,Jpn. J. Appl. Phys. 10 (1971) 736.
D. Uskokovic, P. Kostic, O. Milosevic, V. Petrovic andM. M. Ristic, “Sintered Metal-Ceramic Composites”, edited by G. S. Upadhyaya (Elsevier, Amsterdam, 1984) p. 513.
T. O. Sokoly, M. A. Seitz, J. P. Guertin, P. P. Schumacher and M. E. Potter, “Development of a new type of non-linear resistance valve block for surge arresters”, EPRI, EL-1647, Project 425-1, Final report, December 1980.
T. Asokan, PhD thesis, Indian Institute of Science, Bangalore, India (1986).
T. K. Gupta andR. L. Coble,J. Amer. Ceram. Soc. 51 (1968) 521.
T. Asokan, G. N. K. Iyengar andG. R. Nagabhushana,J. Mater. Sci. (in press).
M. Inada,Jpn. J. Appl. Phys. 17 (1978) 1.
J. Wong,J. Appl. Phys. 46 (1975) 1653.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Asokan, T., Iyengar, G.N.K. & Nagabhushana, G.R. Studies on microstructure and density of sintered ZnO-based non-linear resistors. J Mater Sci 22, 2229–2236 (1987). https://doi.org/10.1007/BF01132965
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01132965