Literature Cited
Yu. F. Yurchenko, V. F. Murav'ev, B. A. Pyatunin, and B. G. Malyavin, “Choosing cutting methods in reactor repair,” At. Énerg.,34, No. 6, 427–434 (1973).
N. S. Kabanov and A. V. Piskunov, “Contact-arc cutting by melting for ferrous and nonferrous metals,” Avtomticheskaya Svarka, No. 4, 18–20 (1967).
A. L. Livshits, Electric-Pulse Metal Machining [in Russian], Mashinostroenie, Moscow (1967), pp. 16–17.
A. S. Davydov, N. I. Larionov, and M. M. Cherednikov, A. Method of Making Powders and Crushed Materials, Inventors' Certificate No. 11978, Byull. Izobret., No. 9 (1959).
V. S. Pavlichenko, “A method of air-contact cutting for a metal based on a graphitized electrode and alternating current,” Electrophysical and Electrochemical Machining Methods [in Russian], No. 4 (1970), pp. 17–21.
V. F. Murav'ev and B. G. Malyavin, “Electrocontact machining for installation purposes,” Svarochnoe Proiz., No. 1, 90–94 (1971).
V. K. Nevezhin, Electrospark Metal Cutting [in Russian], Oborongiz, Moscow (1953), p. 184.
V. B. Vitlin and A. S. Davydov, Electrophysical Machining Methods in Metallurgical Production [in Russian], Metallurgiya, Moscow (1979).
A. A. Kondrat'ev et al., “Choice of special equipment for processing fuel pins of VVÉR type by solvent-extraction technology,” in: Research in Reprocessing Irradiated Fuel: Comecon Symposium Proceedings [in Russian], Vol. 1, Czechoslovak Atomic Energy Commission, Prague (1972), pp. 172–182.
V. F. Murav'ev, B. G. Malyavin, and V. A. Vasin, “Equipment for electrocontact cutting,” Stanki i Instrument No. 5, 26–27 (1986).
V. F. Murav'ev et al., “Designing disk electrodes for electrocontact cutting of metals,” Svarochnoe Proiz., No. 6(3), 140–145 (1979).
V. F. Murav'ev, B. G. Malyavin, and A. I. Gus'kov, “Electrocontact cutting of deep holes in power plant,” Svaroch. Proizod., No. 5(2), 119–123 (1978).
I. I. Moroz and R. B. Isakova, A Study of Chemical Electroerosion Methods of Machining Various Materials [in Russian], ÉNIMS, Moscow (1968).
V. F. Murav'ev, V. A. Vasin, V. I. Buryakov, and I. A. Chistyakov, “Experience in repairing VVÉR-type reactors by the use of contact-arc cutting,” in: Atomic Science and Engineering, Series Welding and Nuclear Engineering, No. 1 (18) (1987), pp. 28–33 [in Russian].
Additional information
Translated from Atomnaya Énergiya, Vol. 65, No. 3, pp. 194–202, September, 1988.
Rights and permissions
About this article
Cite this article
Murav'ev, V.F., Malyavin, B.G. & Yurchenko, Y.F. Contact-arc cutting and processing in nuclear power. At Energy 65, 748–757 (1988). https://doi.org/10.1007/BF01123017
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01123017