Skip to main content

Crystallization of fibres inside a matrix: a new way of fabrication of composites

Abstract

Fibrous composites are normally fabricated by inserting premade fibres into a matrix and trying to tailor mechanical or physical properties of the material by a proper choice of fibre arrangement, fibre volume fraction, structure and properties of interface, etc. As a rule, this method satisfies all the needs fairly well. But in many cases, particularly when heat-resistant composites are involved, it leads to complications which cause composite experts to refrain from being involved in technically very attractive projects. So the need for alternative methods of composite fabrication obviously exists. The process described here is an example of such an alternative. It is based on the fibres growing from the melt within the volume of the matrix. The matrix should have prefabricated continuous cylindrical channels to be filled with the melt of the fibre material. The process is described using as a model a composite with a molybdenum matrix and single crystalline sapphire fibres. It is shown that the productivity of oxide fibre fabrication based on the process described can be some orders of magnitude higher than that based on the well known Czochralsky's and Stepanov's methods. The strength of the single-crystalline sapphire fibres obtained has been studied, as well as the high-temperature creep strength of composites containing such fibres. Some of the results of these experiments are reported here.

This is a preview of subscription content, access via your institution.

References

  1. H. E. Labelle Jr andA. I. Mlavsky,Nature 216 (1967) 574.

    Google Scholar 

  2. S. T. Mileiko andV. I. Kazmin,Mech. Compos. Mater. 4 (1979) 723 (in Russian).

    Google Scholar 

  3. S. T. Mileiko, in “Strong Fibres”, edited by W. W. Watt and B. V. Perov (North-Holland, Amsterdam, 1985) pp. 87–114.

    Google Scholar 

  4. S. T. Mileiko, in “Fabrication of Composites”, edited by A. Kelly and S. T. Mileiko (North-Holland, Amsterdam, 1983) pp. 221–94.

    Google Scholar 

  5. S. T. Mileiko andV. I. Kazmin,Mecanica compozitnych materialov, in press (in Russian).

  6. V. I. Kazmin, S. T. Mileiko andV. V. Tvardovsky,Compos. Sci. Technol. 38 (1990) 69.

    Google Scholar 

  7. S. T. Mileiko andV. I. Kazmin,ibid., in press.

    Google Scholar 

  8. S. T. Mileiko, in “Mechanics of deformable solids and structures”, edited by V. V. Novozhilov (Nauka, Moscow, 1975) pp. 294–7 (in Russian).

    Google Scholar 

  9. D. J. Gooch andG. W. Groves,Phil. Mag. 28 (1973) 623.

    Google Scholar 

  10. R. Chang,J. Appl. Phys. 131 (1960) 484.

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Mileiko, S.T., Kazmin, V.I. Crystallization of fibres inside a matrix: a new way of fabrication of composites. J Mater Sci 27, 2165–2172 (1992). https://doi.org/10.1007/BF01117932

Download citation

  • Received:

  • Accepted:

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF01117932

Keywords

  • Molybdenum
  • Fibre Volume
  • Fibre Material
  • Proper Choice
  • Fibre Volume Fraction