Abstract
Phase transformations in a Cu-AI alloy which was in the martensitic state were examined by the use of differential thermal analysis. The influence of the speed of temperature changes on the character of the phase transformation was determined. The new sequence of phase transformations in martensite is discussed and related to the physical properties (the “shape memory effect”). Characteristic temperatures and heats of transformation in the alloy are also estimated.
Similar content being viewed by others
References
J. Perkins,Met. Trans. 4 (1973) 2709.
H. Warlimont andL. Delaey, “Martensitic Transformations in Copper-Silver and Gold-based Alloys” (Pergamon Press, 1974).
C. M. Wayman, in “Shape Memory Effect in Alloys”, edited by J. Perkins (Plenum Press, New York, 1975) p. 1.
G. Occampo andB. Dubois,Mem. Sci. Rev. Met. 74 (1979) 503.
S. D. Kulkarni,Acta Metall. 21 (1973) 1461.
G. Wassermann,Metallwirtschaft 8 (1934) 133.
A. B. Greninger,Trans. AIMS 133 (1939) 204.
G. Occampo, PhD thesis, University of Paris (1980).
Z. Bojarski, H. Morawiec andP. Matyja,Cryst. Res. Technol. 18 (1983) 7, K86.
Z. Bojarski, H. Morawiec, P. Matyja, J. Lelatko andJ. Rasek,Archiwum Mat. Science (in Polish)4 (1983) 91.
W. W. Wendlandt, “Thermal Methods of Analysis” (Interscience, New York, 1964) p. 193.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kwarciak, J., Bojarski, Z. & Morawiec, H. Phase transformation in martensite of Cu-12.4% Al. J Mater Sci 21, 788–792 (1986). https://doi.org/10.1007/BF01117355
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01117355