Skip to main content

Rate sensitivity in the high temperature deformation of dispersion strengthened Al-Fe-V-Si alloys

Abstract

The rate sensitive flow characteristics in the elevated temperature deformation of Al-Fe-V-Si alloys processed by rapid solidification/powder metallurgy route were assessed by the strain rate change tests in compression. With an ultrafine grain size, stabilized by fine dispersoids, a peak rate sensitivity index of ∼0.15 and normal ductility were observed in alloys containing dispersoids up to a volume fraction of 0.37. The lack of superplastic response is interpreted in terms of a high threshold stress for superplastic flow. The threshold stress assessed by an extrapolation procedure is observed to be grain size and temperature dependent. Its origin is suggested to be Zener drag limited boundary migration, which is an essential part of the superplastic flow mechanism.

This is a preview of subscription content, access via your institution.

References

  1. 1.

    T. G. Nieh andJ. Wadsworth, in “Superplasticity in Aerospace Aluminum”, edited by R. Pearce and L. Kelly (Cranfield, UK, 1986) p. 194.

    Google Scholar 

  2. 2.

    G. S. Murty andM. J. Koczak, in “Powder Metallurgy Composites”, edited by P. Kumar, K. Vedula and A. Ritter (The Metallurgical Society, 1988) p. 139.

  3. 3.

    D. J. Skinner, R. L. Bye, D. Raybould andA. M. Brown,Scripta Metall. 20 (1986) 867.

    Google Scholar 

  4. 4.

    C. S. Smith,Trans. Met. Soc. AIME 175 (1948) 15.

    Google Scholar 

  5. 5.

    L. F. Mondolfo, “Aluminum Alloys: Structure and Properties”, (Butterworths, London, 1979) p. 82.

    Google Scholar 

  6. 6.

    G. S. Murty andM. J. Koczak,Mater. Sci. Eng. 96 (1987) 117.

    Google Scholar 

  7. 7.

    Idem, ibid., in press.

    Google Scholar 

  8. 8.

    C. Herring,J. Appl. Phys. 21 (1950) 437.

    Google Scholar 

  9. 9.

    R. L. Coble,ibid. 34 (1963) 1679.

    Google Scholar 

  10. 10.

    M. F. Ashby andR. A. Verrall,Acta Metall. 21 (1973) 149.

    Google Scholar 

  11. 11.

    A. E. Geckinli,Metal Sci. 17 (1983) 12.

    Google Scholar 

  12. 12.

    E. Arzt, M. F. Ashby andR. A. Verrall,Acta Metall. 31 (1983) 1977.

    Google Scholar 

  13. 13.

    M. F. Ashby,Surface Sci. 31 (1972) 498.

    Google Scholar 

  14. 14.

    C. A. P. Horton,Scripta Metall. 8 (1974) 1.

    Google Scholar 

  15. 15.

    C. Frois andO. Dimitrov,Ann. Chim. 1 (1966) 113.

    Google Scholar 

  16. 16.

    R. Fromageau,Mem. Sci. Rev. Metall. LXVI (1969) 287.

    Google Scholar 

Download references

Author information

Affiliations

Authors

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Murty, G.S., Koczak, M.J. Rate sensitivity in the high temperature deformation of dispersion strengthened Al-Fe-V-Si alloys. J Mater Sci 24, 510–514 (1989). https://doi.org/10.1007/BF01107435

Download citation

Keywords

  • Ductility
  • Rate Sensitivity
  • Temperature Deformation
  • Threshold Stress
  • Boundary Migration