Abstract
The fracture strength and residual stress in glass microscope slides for water, oil and air thermal quenching are compared with the authors' prior theoretical analysis. In addition, elastic modulus and internal friction measurements are used to evaluate the effects of the thermal quenching.
Similar content being viewed by others
References
C. C. Chiu andE. D. Case,J. Mater. Sci. 26 (1991) 000.
D. P. H. Hasselman, R. Badaliance, K. R. McKinney andE. P. Chen,ibid. 11 (1976) 458.
M. Ashizuka, T. E. Easler andR. C. Bradt,J. Amer. Ceram. Soc. 66 (1983) 542.
H. Kamizono andK. Niwa,J. Mater. Sci. Lett. 3 (1984) 588.
F. V. Tooley, “Handbook of Glass Manufacture”, Vol. 1 (Ogden, New York, 1961) p. 391.
E. D. Case,J. Mater. Sci. 19 (1984) 3702.
K. Matsushita, S. Kuratani, T. Okamoto andM. Shimada,J. Mater. Sci. Lett. 3 (1984) 345.
F. P. Mallinder andB. A. Proctor,Phys. Chem. Glasses 5 (4) (1964) 91.
J. D. L. Vega andD. C. Bogue,Chem. Eng. Commun. 53 (1987) 23.
N. M. Pavlushkin, S. I. Silvestrovich, V. M. Firsov andV. D. Kazakov,J. Mater. Sci. 4 (1969) 479.
J. V. Fitzgerald,J. Amer. Ceram. Soc. 34 (1951) 388.
D. E. Day andG. E. Rindone,ibid. 44 (1961) 161.
E. Schreiber, O. L. Anderson andN. Soga, “Elastic Constants and Their Measurements (McGraw-Hill, New York, 1974) p. 82.
J. B. Wachtman,Rev. Sci. Instrum. 29 (1958) 517.
H. M. Chou andE. D. Case,Mater. Sci. Engng 100 (1988) 7.
B. R. Lawn andD. B. Marshall,Phys. Chem. Glasses 18 (1) (1977) 7.
D. B. Marshall andB. R. Lawn,J. Amer. Ceram. Soc. 60 (1977) 86.
Idem, ibid. 61 (1978) 21.
G. R. Anstis, P. Chantikul, B. R. Lawn andD. B. Marshall,ibid. 64 (1981) 533.
R. C. Buchanan, “Ceramic Materials for Electronics” (Dekker, New York, 1986) p. 10.
R. E. Reed-Hill, “Physical Metallurgy Principles”, 2nd Edn (Van Nostrand-Reinhold, New York, 1973) p. 704.
H. S. Carslaw andJ. C. Jaeger, “Conduction of Heat in Solids” (Clarendon, Oxford, 1959) p. 24.
W. D. Kingery, H. K. Bowen andD. R. Uhlmann, “Introduction to Ceramics” (Wiley, New York, 1976) p. 822.
A. Paul, “Chemistry of Glasses” (Chapman and Hall, New York, 1982) p. 76.
O. S. Narayanaswamy,J. Amer. Ceram. Soc. 61 (1978) 146.
E. Volterra andE. C. Zachmanoglou, “Dynamics of Vibrations” (Merrill Books, Columbus, Ohio, 1965) p. 321.
C. C. Chiu andE. D. Case,Mater. Sci. Engng,A132 (1991) 39.
I. H. Shames andC. L. Dym, “Energy and Finite Element Methods in Structural Mechanics” (Hemisphere, New York, 1985) p. 334.
G. A. Gogotsi, Y. L. Groushevsky andK. K. Strelov,Ceram. Internat. 4 (1978) 113.
M. V. Swain,J. Amer. Ceram. Soc. 73 (1990) 621.
C. W. Smith, Exper. Mech.20 (1980) 390.
A. Shukla andJ. W. Dally,Ibid.,21 (1981) 63.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chiu, CC., Case, E.D. Influence of thermal quench on fracture strength, elastic modulus and internal friction of glass plates. J Mater Sci 27, 2353–2362 (1992). https://doi.org/10.1007/BF01105043
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01105043