Abstract
The physical scaling and cost scaling of a modular stellarator reactor are described. It is shown that configurations based onl=2 are best able to support adequate beta, and physical relationships are derived which enable the geometry and parameters of anl=2 modular stellarator to be defined. A cost scaling for the components of the nuclear island is developed using Starfire (tokamak reactor study) engineering as a basis. It is shown that for minimum cost the stellarator should be of small aspect ratio. For a 4000 MWth plant, as Starfire, the optimum configuration is a 15 coil, 3 field period,l=2 device with a major radius of 16 m and a plasma minor radius of 2 m; and with a conservative wall loading of 2 MW/m2 and an average beta of 3.9%; the estimated cost per kilowatt (electrical) is marginally (7%) greater than Starfire.
Similar content being viewed by others
References
J. L. Shohet, Ultimate and modular torsatrons, in Proceedings of 2nd International Stellarator Workshop, Bavaria, F.R.G. (1980), paper B.3.4.
S. Rehker and H. Wobig, Stellarator fields with twisted coils, IPP 2/215 (1973).
I. Sviatoslavsky et al.,IEEE Trans. Plasma Sci. PS-9:163 (1981).
R. L. Miller and R. A. Krakowski, The modular Stellarator fusion reactor (MSR) concept. 3rd IAEA Technical Committee Meeting and Workshop on Fusion Reactor Design and Technology, Tokyo, Japan (1981).
D. Pfirsch, in Proceedings of the 5th Erice School on Fusion Reactor Technology (to be published).
P. A. Politzer, L. M. Lidsky, and D. B. Montgomery, Torsatrons and the TOREX proof-of-principle experiment, MIT report PFC/TR-79-1 (1979).
I. Iiyoshi and K. Uo, Heliotron as a steady fusion reactor, inProceedings of 5th International Conference on Plasma Physics and Controlled Nuclear Fusion Research (IAEA-CN-33/G4, (1974), Vol. III, p. 619.
R. Carruthers, P. A. Davenport, and J. T. D. Mitchell, The economic generation of power from thermonuclear fusion, CLM-R85 (1967).
J. T. D. Mitchell, Blanket replacement in toroidal fusion reactors, 3rd ANS Topical Meeting on Technology of Controlled Nuclear Fusion, Sante Fe (1978), invited paper.
W. N. G. Hitchon, P. C. Johnson, and C. J. H. Watson, The case for a low aspect ratio, modular stellarator reactor, in Proceedings 3rd International Stellarator Workshop, Moscow (1981).
C. C. Baker et al., Starfire—a commercial tokamak fusion power plant study. AWL/FPP-80-1 (1980).
D. T. Anderson, J. A. Derr, and J. L. Shohet,IEEE Trans. Plasma Sci. P5-9:212 (1981).
T. K. Chu, H. P. Furth, J. L. Johnson, C. Ludescher, and K. E. Weimer,IEEE Trans. Plasma Sci. P5-9:228 (1981).
W. N. G. Hitchon and P. J. Fielding,Nucl. Fusion 21:775 (1981).
A. Gibson,Phys. Fluids 10:1553 (1967).
P. J. Fielding and W. N. G. Hitchon,J. Plasma Phys. 24:453 (1980).
D. Lortz and J. Nuhrenberg,Nucl. Fusion 17:125 (1977).
I. B. Bernstein, E. A. Frieman, M. D. Kruskal, and R. M. Kulsrud,Proc. Roy. Soc. A244:17 (1958).
J. L. Shohet and D. T. Anderson,Comments Plasma Phys. Controlled Fusion 7:103 (1982).
V. D. Shafranov and E. I. Yurchenko,Sov. Phys., JETP 26:682 (1968).
A. H. Glasser, J. M. Greene, and J. L. Johnson,Phys. Fluids 18:87 (1975).
A. B. Mikhailovskii,Nucl. Fusion 15:95 (1975).
W. R. Spears and J. A. Wesson,Nucl. Fusion 20:1525 (1980).
WVII-A Team, Plasma Physics and Controlled Nuclear Fusion Research, (1978), paper IAEA-CN-37/H-2.
J. A. Derr and J. L. Shohet,IEEE Trans. Plasma Sci. PS-9:234 (1981).
F. Karger and K. Lackner,Phys. Lett. 61A:385 (1977).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Hitchon, W.N.G., Johnson, P.C. & Watson, C.J.H. Parameter and cost optimizations for a modular stellarator reactor. J Fusion Energ 3, 25–46 (1983). https://doi.org/10.1007/BF01053466
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01053466