Abstract
Boundary layer suction is one of the effective methods of intensifying heat and mass transfer and controlling the boundary layer. Many investigations are now being made of a boundary layer with blowing, but the influence of suction on heat and mass transfer in a turbulent boundary layer is studied much less often. Moreover, all known experimental studies [1–5] have been made under nearly isothermal conditions. Under these conditions, the existing theories [6–9] give a fairly good description of the experiments. In the present paper, we report on theoretical and experimental investigation into the influence of uniform suction on heat and mass transfer in a nonisothermal turbulent boundary layer in the presence of chemical reactions on the surface.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Literature cited
H. S. Mickley, R. C. Ross, A. L. Squyers, and W. E. Stewart, “Heat, mass and momentum transfer for flow over a flat plate with blowing or suction,” NACA, TN, No. 3208 (1954).
R. J. Moffat and W. M. Kays, “The turbulent boundary layer on a porous plate: experimental heat transfer with uniform blowing and suction,” Int. J. Heat Mass Transfer,11, No. 10 (1968).
J. K. Aggarwal and M. A. Hollingsworth, “Heat transfer for turbulent flow with suction in a porous tube,” Int. J. Heat Mass Transfer,16, No. 3 (1973).
P. N. Pomanenko and V. Z. Kitaev, “Influence of suction of air from a boundary layer on friction and heat transfer,” in: Machines and Mechanisms of the Timber Industry [in Russian; No. 18 in the series published by the Moscow Institute of Timber Technology], Moscow (1967).
L. S. Bobe and D. D. Malyshev, “Calculation of the condensation of vapor when a vaporgas mixture flows across tubes,” Teploénergetika, No. 12 (1971).
W. H. Dorrance and F. J. Dore, “The effect of mass transfer on the compressible turbulent boundary-layer skin friction and heat transfer,” J. Aeronaut. Sci.,21, No. 6 (1954).
V. P. Motulevick, “Turbulent heat and mass transfer on a. plate in the case of porous suction and supply of various gases,” Inzh.-Fiz. Zh., No. 1 (1963).
S. S. Kutateladze and A. I. Leont'ev, Heat and Mass Transfer and Friction in the Turbulent Boundary Layer, Energiya, Moscow (1972).
R. B. Kinney and E. M. Sparrow, “Turbulent flow, heat transfer and mass transfer in a tube with surface suction,” Trans. ASME. Ser. C, J. Heat Transfer,92, No. 2 (1970).
A. I. Leont'ev, É. P. Volchkov, E. G. Zaulichnyi, and E. I. Sinaiko, “Experimental determination of the rate of depletion of graphite under strongly nonisothermal conditions,” Fiz. Goreniya Vzryva,3, No. 2 (1967).
E. P. Bolchkov and P. V. Nikitin, “Burning of a graphite surface when an inert gas is blown through it,” Giz. Goreniya Vzryva,9, No. 3 (1973).
Author information
Authors and Affiliations
Additional information
Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 37–44, March–April, 1979.
Rights and permissions
About this article
Cite this article
Volchkov, É.P., Sinaiko, E.I. & Terekhov, V.I. Turbulent boundary layer with suction under nonisothermal conditions. Fluid Dyn 14, 197–203 (1979). https://doi.org/10.1007/BF01051660
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01051660