Abstract
Composite precursors of mullite-zirconia were prepared by mixing a mullite precursor prepared by the partial hydrolysis method and zirconium alkoxide. The mullite precursor was reacted with zirconium alkoxide in order to achieve a uniform dispersion of fine zirconia particles in the mullite matrix. The composite precursors were hydrolysed and heat-treated to examine the properties of the precursors. X-ray diffraction data showed that a large amount of tetragonal zirconia existed in the composite powders in spite of the high temperature calcination below 1600° C. These results suggested that transformation toughening of mullite-based ceramics prepared by firing the composite precursor compacts could be attained if the total densification occurred at low temperature.
Similar content being viewed by others
References
R. Ruh, K. S. Mazdiyasni andM. G. Mendiratta,J. Amer. Ceram. Soc. 71 (1988) 503.
S. Kanzaki, T. Kumazawa, J. Asaumi, O. Abe andH. Tabata,Yogyo-Kyokai-Shi 93[7] (1985) 407–8.
H. Suzuki andH. Saito,ibid. 95[7] (1987) 697–702.
H. Suzuki, Y. Tomokiyo, Y. Suyama andH. Saito,Nippon-Seramikkusu-Gakujutsuronbun-Shi 96 (1988) 67–73.
H. Suzuki, H. Nagata, Y. Suyama andH. Saito,J. Jpn Soc. Powder and Powder Metall. 35 (1988) 211.
H. Toraya, M. Yoshimura andS. Somiya,J. Amer. Ceram. Soc. 67 (1984) C-119.
D. C. Bradley, R. C. Mehrotra andD. P. Gaur, “Metal Alkoxides” (Academic Press, London, New York, San Francisco, 1978) p. 306.
H. Saito, H. Suzuki andH. Hayashi,J. Chem. Soc. Jpn [9] (1988) 1571–7.
T. Ikemoto, N. Mizutani, M. Kato andY. Mitarai,Yogyo-Kyokai-Shi 93[9] (1985) 585–6.
S. Prochazka andF. J. Kg,J. Amer. Ceram. Soc. 66[12] (1983) 874–80.
W. E. Cameron,Amer. Ceram. Soc. Bull. 56[11] (1977) 1003–11.
N. L. Bowen andJ. W. Greig,J. Amer. Ceram. Soc. 7[4] (1924) 238–54.
R. Roy,ibid. 52 (1969) 344.
H. Suzkuki, K. Ota andH. Saito,Yogyo-KyokaiShi 95[2] (1987) 170–5.
Idem, J. Mater. Sci. 23 (1988) 1534–8.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Suzuki, H., Saito, H. Preparation and sintering of fine composite precursors of mullite-zirconia by chemical copolymerization of metal alkoxides. J Mater Sci 25, 2253–2258 (1990). https://doi.org/10.1007/BF01045798
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01045798