Abstract
The reduction of corner burn test data to a smaller number of useful parameters is attempted using an experimentally based calculated flow field and the concept of product yields. This is applied to a range of plastic and natural products, all of which had been tested in our corner burn test facility. Comparison of the experimental results are also made with predictions generated by the OSU Room Fire Model using data taken on the OSU rate of heat release calorimeter as input data.
Similar content being viewed by others
References
F. M. Baron and R. B. Williamson,Journal of Fire and Flammability, 4, 99 (1972).
The OSU RHR Calorimeter is now an ASTM test, ASTM-E906.
E. E. Smith and S. Satija,Journal of Heat Transfer, 105, 282 (1983).
E. E. Smith and J. M. Sauer,Journal of Fire Sciences, 1, 235 (1983).
H. H. Spieth; J. G. Gaume; R. E. Luoto and D. M. Klinck,A Combined Hazard Index Fire Test Methodology for Aircraft Cabin Materials, Parts I and II. DOT/FAA/CT-82/36-I, II. April, 1982.
H. W. Emmons and H. E. Mitler, NBS-GCR-81-344, October, 1981.
See ASTM-E-603-77 for typical dimensions and protocols.
B. J. McCaffrey and G. Heskestad,Combustion and Flame, 25, 125 (1976).
J. G. Quintiere and B. J. McCaffrey, NBSIR-80-2054, volumes I and II, November, 1980.
J. G. Quintiere; W. W. Jones and W. J. Rinkinen,Combustion Science and Technology, 26, 193 (1981).
Y. Jaluria, NBSIR-84-2841, May, 1984.
E. D. Dickens and G. F. Smith,8th International Conference on Fire Safety, p. 227, January, 1983.
Author information
Authors and Affiliations
Additional information
Reference: E. D. Dickens, Jr., and G. F. Smith, “The Use of Computer Fire Models in Corner Burn Tests,”Fire Technology, Vol. 21, No. 2, May 1985, p. 85.
Note: Prepared for the Center for Fire Research 1984 Conference, National Bureau of Standards, October 17–19, 1984.
Rights and permissions
About this article
Cite this article
Dickens, E.D., Smith, G.F. The use of Computer fire models in corner burn tests. Fire Technol 21, 85–104 (1985). https://doi.org/10.1007/BF01040152
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01040152