Abstract
Stress fields were found for boundary elements that consist of linear arrays of dislocations, or arrays of dislocations that simulate a crack tip. A number of two-dimensional elastic boundary value problems were solved using these elements. Crack growth paths were predicted for pairs of interacting cracks and the energetics of multiple crack growth away from a free surface was analysed. In certain simple elastic-plastic problems, where the general shape of the plastic zone is known, the plastic zone size was predicted.
Similar content being viewed by others
References
B. A. Bilby andJ. D. Eshelby, in “Fracture”, Vol. 1, edited by H. Liebowitz (Academic Press, New York and London, 1968).
R. W. Lardner, “Mathematical Theory of Dislocations and Fracture” (University of Toronto Press, Toronto, 1974).
S. L. Crouch,Int. J. Numer. Meth. Eng. 10 (1976) 301.
M. J. Marcinkowski andE. S. P. Das,Int. J. Fracture 10 (1974) 81.
M. P. Cleary,Int. J. Numer. Meth. Eng. 10 (1976) 679.
D. S. Dugdale andA. Ruiz, “Elasticity for Engineers” (McGraw Hill, New York, 1971).
C. A. Brebbia, “The Boundary Element Method for Engineers” (Pentech Press, Plymouth, 1978).
M. Isida, in Proceedings of the Conference on Numerical Methods in Fracture Mechanics, edited by A. R. Luxmoore and D. R. J. Owen, (University College, Swansea, 1978).
N. J. Mills,J. Mater. Sci. 11 (1976) 363.
N. I. Muskhelishvili, “Some Basic Problems of the Mathematical Theory of Elasticity” (Noordhoff Publishing Co., Leyden, The Netherlands, 1953).
V. Vitek,J. Mech. Phys. Sol. 24 (1975) 67.
A. H. England, “Complex Variable Methods in Elasticity” (John Wiley and Sons, New York, 1971).
W. T. Read andW. Shockley,Phys. Rev. 78 (1950) 275.
G. C. Sih (Ed.), in “Three-dimensional Crack Problems”, Vol. 2 (Noordhoff Publishing Co., Leyden, The Netherlands, 1975).
R. P. Kambour,J. Polymer Sci. Macromol. Rev. 7 (1973) 1.
J. R. Rice,J. Appl. Mech. Trans. ASME E35 (1968) 379.
O. L. Bowie, in “Methods of Analysis and Solution of Crack Problems”, edited by G. C. Sih (Noordhoff Publishing Co., Leyden, The Netherlands).
W. T. Koiter,Proc. K. Ned. Akad. Wet. B59 (1956) 365.
D. S. Dugdale,J. Mech Phys. Sol. 8 (1960) 100.
J. N. Goodier andF. A. Field, in “Fracture of Solids”, edited by D. C. Drucker and J. J. Gilman (John Wiley and Sons, New York, 1963).
J. Weertman, Proceedings of the International Conference on Fracture, Sendai, Japan, 1966 Vol. 1 (Japan Society, Tokyo, 1966) p. 153.
H. R. Brown andI. M. Ward,Polymer 14 (1973) 469.
N. J. Mills andN. Walker,Eng. Fracture Mech. 13 (1980) 479.
N. J. Mills,J. Mater. Sci. 16 (1981) 1332.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mills, N.J. Dislocation array elements for the analysis of crack and yielded zone growth. J Mater Sci 16, 1317–1331 (1981). https://doi.org/10.1007/BF01033848
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01033848