Abstract
The electrochemical behaviour of aluminium alloys, 2024 in conditions T3 and T4 and also of 7075-T6, in 3% NaCl solution was studied. The corrosion and the pitting potentials were determined by potentiodynamic techniques. The potentiostatic method was also used to study the steady state at specific potentials. Among the three pH levels (1, 6 and 12), polarization studies showed active-passive behaviour only at pH 6. Thus, pitting potential was imposed at pH 6 for further corrosion behaviour. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), were used to characterize the surfaces of electrodes after they have been subjected to electrochemical testing. In the case of alloy 2024, image analysis permitted to relate the distribution and the size of the precipitates to different types of heat treatment (T3 and T4) and to the corrosion phenomena.
Résumé
Le comportement des alliages d'aluminium 2024 à l'état T3 et T4 7075-T6 a été par voie électrochimique dans la solution à 3% de NaCl et pour differents pH 1, 6 et 12. Les études potentiocinétiques ont permis de déterminer les potentiels de corrosion et de piqûration. L'état stationnaire pour certains potentiels a été examiné par voie potentiostatique. Un comportement actif-passif a été observé lors des études potentiodynamiques seulement à pH 6. ainsi, les études potentiostatiques ont été effectuées à ce même pH. L'examen de surfaces des électrodes après les essais électrochimiques ont été effectuées par microscopie électronique à balayage et par micro-analyse par dispersion des rayons-X (EDAX). Pour l'alliage 2024, l'analyse d'image a permis de relier la distribution et la taille des précipités (ou inclusions) aux différents traitements thermiques (T3 et T4) et aux phénomènes de corrosion.
Similar content being viewed by others
References
M. Pourbaix, ‘Atlas d'équilibres électrochimiques à 25°C’, Gauthier-Villars, Paris (1963).
H. L. Craig, in ‘Localized Corrosion’ (edited by R. W. Stachle), NACE, Houston, TX (1974) pp. 600–7.
M. J. Pryor, in ‘Localized Corrosion’, [2], pp. 600–7.
Aluminium, ‘Properties and physical metallurgy’, (edited by John E. Hatch), ASM (1984).
Reboul (M. C.),Revue de l'aluminium,419, 399 (1973).
W. Schwenk,Corrosion 20(4) (1964) 1297.
I. L. Rozenfeld et I. S. Danilov,Corros. Sci. 32 (1981), 129.
J. Garz, H. Worch et W. Schatt,9 (1971), 71.
Y. A. M. Kolotorkin,J. Electrochem. Soc. 108 (1961) 209.
H. H. Uhlig et H. P. Leckie,113 (1966) 1262.
T. P. Hoar, D. C. Mears et G. P. Rothwell,Corros. Sci. 5 (1965) 279.
J. R. Galvele,J. Electrochem. Soc. 123 (1976) 464.
J. Aitchison et J. A. C. Brown,The Lognormal Distribution 176 (1957) 365.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Berrada, S., Elboujdaini, M. & Ghali, E. Comportement electrochimique des alliages d'aluminium 2024 ET 7075 dans un milieu salin. J Appl Electrochem 22, 1065–1071 (1992). https://doi.org/10.1007/BF01029586
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01029586