Advertisement

Journal of Materials Science

, Volume 20, Issue 2, pp 710–717 | Cite as

Sinterability and properties of Ti(N1−x, O x ) y -(V, Ta)C-Ni sintered alloys having a golden colour

  • Mikio Fukuhara
  • Tetsuya Mitsuda
  • Yuji Katsumura
  • Akira Fukawa
Article

Abstract

The effect of oxygen and carbide addition on the sinterability of TiN y (0.42<y<1)-Ni alloys, in which part of the nitrogen is replaced by oxygen was investigated. It was found that sinterability increased as the oxygen and carbide content increased, but the strength of the resultant sintered alloys was significantly reduced due to the presence of Ni3Ti and Ti2O3 phases when the oxygen content exceeded 50 mol %. The sintered alloy with the highest hardness was found whenx=0.7,y=0.78 and the (V,Ta)C content was 18% by weight and this alloy was characterized by having a low density, good corrosion resistance and the colour of gold.

Keywords

Oxygen Nitrogen Colour Polymer Gold 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    M. Fukuhara andH. Mitani,J. Jpn. Soc. Powder Powder Metall. 26 (1979) 143.Google Scholar
  2. 2.
    K. Niihara, A. Nakahira andT. Hirai,J. Amer. Ceram. 67 (1984) 6.Google Scholar
  3. 3.
    M. Fukuhara, K. Tsutsumi andH. Mitani,J. Jpn. Soc. Powder Powder Metall. 27 (1980) 17.Google Scholar
  4. 4.
    H. Mitani, H. Nagai andM. Fukuhara, “Modern Developments in Powder Metallurgy”, Vol. 14, edited by H. H. Hansner (Plenum Press, New York, 1981) p. 347.Google Scholar
  5. 5.
    R. Kieffer, G. Trabesinger andN. Reiter,Planseeber. 17 (1969) 25.Google Scholar
  6. 6.
    Y. Hashimoto, K. Koyama, S. Omori andY. Arami,J. Jpn Soc. Powder Powder Metall. 27 (1980) 155.Google Scholar
  7. 7.
    J. R. Hague, J. F. Lynch, A. Ruduick, F. C. Holden andW. H. Duckworth, “Refractory Ceramics for Aerospace” (American Ceramic Society, 1964) p. 251.Google Scholar
  8. 8.
    M. P. Arbuzov, B. V. Khaenko andE. T. Kachkovskaya,Sov. Powder Metall. 126 (1973) 490.Google Scholar
  9. 9.
    A. Brager,Acta Physiochim. URSS 11 (1939) 617.Google Scholar
  10. 10.
    K. Iizumi, K. Kudaka, T. Hanazawa andH. Kita,Yogyo-Kyokai-Shi 88 (1980) 175.Google Scholar
  11. 11.
    S. Sato, K. Shinozuka, K. Uematsu, N. Mizutani andM. Kato,ibid. 89 (1981) 381.Google Scholar
  12. 12.
    H. Bilz,Z. Phys. 153 (1958) 338.Google Scholar

Copyright information

© Chapman and Hall Ltd 1985

Authors and Affiliations

  • Mikio Fukuhara
    • 1
  • Tetsuya Mitsuda
    • 1
  • Yuji Katsumura
    • 1
  • Akira Fukawa
    • 1
  1. 1.Research and Development DepartmentToshiba TungaloyYokohamaJapan

Personalised recommendations