References
W. Mair, “Experiments on separation of boundry layers on probes in front of blunt-nosed bodies in a supersonic air stream”, Philos. Mag., vol. 43, no. 342, 1952.
D. J. Maull, “Hypersonic flow over axially symmetric spiked bodies”, J. Fluid Mech., vol. 12, 1962.
C. J. Wood, “Hypersonic flow over spiked cones”, J. Fluid Mech., vol. 12, pt. 4, 1962.
S. M. Bogdanoff and I. S. Vas, “Some experiments on hypersonic separated flows”, ARSI vol. 32, no. 10, 1962.
G. E. Gadd, W. F. Cope, and J. L. Attridge, “Heat transfer and skin friction measurements at a Machnumber of 2.44 for a turbulent boundary layer on a flat surface and in regions of separated flow”, Aeronaut Res. Council. Rept. and Mem., no. 3148, 1960.
Ya. S. Itskhoki, Pulse Devices [in Russian], Moscow, Izd-vo Sovetskoe radio, 1959.
R. Hermann, Supersonic Inlet Diffusors [Russian translation], Moscow, Fizmatigz, 1960.
R. Hermann and C. T. Hsu, “Tree flight simulation of the testing of supersonic inlet diffusors in a free jet wind tunnel with 50% area ratio in the mach Number Range from 1.5 to 3”, Rose-mount Aeronaut. Laboratories, University of Minnesota Research Report, 117, August, 1955.
J. F. Connors and J. C. Lovell, “Some observations on supersonic stabilization and deceleration devices”, IAS Paper, no. 19, 1960.
A. L. Trimpi, “An analysis of buzzing in supersonic ramjets by a modified one-dimensional nonstationary wave theory”, NASA RM L 52A18, March, 1962.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Dan'kov, B.N., Novikov, L.V. Unsteady supersonic flow over cone with disk-type skirt. Fluid Dyn 3, 125–131 (1968). https://doi.org/10.1007/BF01019215
Issue Date:
DOI: https://doi.org/10.1007/BF01019215