Abstract
This paper gives the theoretical and experimental work on the guide and the developed components, which include transitions, bends, couplers and junctions. A conformal mapping technique has been applied to grooves of V-shaped cross-section. Experimental measurements confirm the theoretical predictions.
Similar content being viewed by others
References
Ho T.K. and Harris D.J., “Millimetric wave groove guide with V-shaped grooves”, Electronics Letters, Vol. 20, No. 19, pp. 777–778, September, 1984.
Yee H.Y. and Audeh N.F., “Wave propagation in groove guides”, Proceedings 21st Nat. Elect. Conf., Chicago, Vol. 21, pp. 18–23, October 1965.
Choi Y.M., Harris D.J. and Tsang K.F., “Theoretical and experimental characteristics of single V-groove guide for X-band and 100 GHz operation”, IEEE Transactions on MTT., Vol. 36, No. 4, pp. 715–723, April 1988.
Choi Y.M. and Harris D.J., “Groove guide for short millimetric waveguide systems”, Infrared and Millimeter Waves, Vol. 11, Chapter 3, pp. 99–140, Academic Press, USA., December 1984.
Choi Y.M. and Tsang K.F., “Optimization of dimensions of single V-groove guide”, Electronics Letters, Vol. 21, No. 11, pp. 477–479, May 1985.
Choi Y.M., “Groove guide as a short-millimetric waveguide system”, PhD. thesis, University of Wales/UWIST., April 1982.
Tischer F.J., “Experimental attenuation of rectangular waveguide at millimeter wavelengths”, IEEE Transactions on MTT., Vol. 27, No. 1, pp. 31–37, January 1979.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Choi, Y.M. V-Groove guide and components for 100 GHz operation. Int J Infrared Milli Waves 9, 635–646 (1988). https://doi.org/10.1007/BF01013416
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01013416