Abstract
We have constructed bolometers operating at temperatures of 0.1 K and 0.2 K cooled by adiabatic demagnetization. The electrical noise equivalent power (NEP) of the bolometers was found to be 1.8×10−16 W/Hz1/2 and 6.6×10−16 W/Hz1/2 respectively. These values are within a factor of two of the expected performance based upon bolometer theory. The thermistor material used was gallium doped single crystal germanium, for which we find a resistivity temperature dependence of the form ρ = ρo exp (AT−1/2).
Similar content being viewed by others
References
M. W. Werner and F. C. Witteborn, Proc. Second ESO Infrared Workshop, Ed. A. F. M. Moorwood and K. Kjär, p. 405 (1982).
S. S. Meyer, A. D. Jeffries, and R. Weiss, Ap. J.,271, L1 (1983).
J. V. Radostitz, I. G. Nolt, P. Kittel, and R. J. Donnelly, Rev. Sci. Instrum.,49, 86 (1978).
P. Kittel, J. Energy,4, 266 (1980).
R. D. Britt and P. L. Richards, Int. J. Infrared and Millimeter Waves,2, 1083 (1981).
P. Kittel, Cryogenics,20, 599 (1980).
Eagle-Picher, PO Box 737, Quapaw, OK.
D. Redfield, Phys. Rev. Lett.,30, 1319 (1973).
N. S. Nishioka, P. L. Richards, and D. P. Woody, Appl. Opt.,17, 1562 (1978).
Victoreen Inc., 10101 Woodland Ave., Cleveland, OH 44104.
Infrared Laboratories Inc., 1808 E. 17th St., Tucson, AZ 85719.
J. C. Mather, Appl. Opt.,21, 1125 (1982).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Lesyna, L., Roellig, T.P.L. & Kittel, P. Bolometers operated at 0.1 K and 0.2 K cooled by adiabatic demagnetization. Int J Infrared Milli Waves 5, 755–760 (1984). https://doi.org/10.1007/BF01010197
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF01010197