Abstract
Practical methods are considered for finding the center coordinates and radius of the mean circle in analyzing the profile geometry of cylindrical surfaces of large bodies. A general method of constructing formulas is proposed for deriving these parameters for small eccentricities. A method is given for obtaining the center coordinates and radius of the mean circle with high accuracy by iteration, which is recommended when the profile coordinates are measured for small and large eccentricities and also when the points are unevenly distributed on the profile.
Similar content being viewed by others
References
I. D. Gebel', Izmer. Tekhn., No, 11, 16 (1978).
R. C. Spragg, Proc. Inst. Mech. Engrs,182, Part 3k, 497 (1967–1968).
A. N. Avdulov, Monitoring and Circularity Estimation for Machine Components [in Russian], Izd. Standartov, Moscow (1974).
All-Union State Standard 2462-81 (Comecon Standard 301-88). Basic Standards for Interchangeability: Tolerances on Shape and Surface Disposition. Basic Terms and Definitions [in Russian].
A. A. Samarskii and A. V. Gulin, Numerical Methods [in Russian], Nauka, Moscow (1989).
V. I. Krylov, V. V. Bobkov, and P. I. Monastyrskii, Principles of Computational Method Theory: Interpolation and Integration [in Russian], Nauka i Tekhnika, Minsk (1983).
Yu. S. Sysoev, V. Sh. Magdeev, and L. N. Stolyar, Energomashinostroenie, No. 3, 30 (1989).
F. Gill, W. Murray, and M. Wright, Practical Optimization [Russian translation], Mir, Moscow (1985).
Yu. S. Sysoev and V. Sh. Magdeev, Izmer. Tekhn., No. 11, 27 (1990).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 10, pp. 22–25, October, 1995.
Rights and permissions
About this article
Cite this article
Sysoev, Y.S. Coordinate methods of determining average-circle parameters in actual surface profile analysis. Meas Tech 38, 1108–1114 (1995). https://doi.org/10.1007/BF00990563
Issue Date:
DOI: https://doi.org/10.1007/BF00990563