Conclusions
-
1.
This method will provide a qualitative evaluation of the effect of vibrations on scale instruments used for linear measurements. It is advisable to evaluate resistance to vibration by finding the critical operating conditions for specific tested instruments.
-
2.
The data obtained for different types of instruments can be used for establishing substantiated norms for the conditions under which specific instruments should be tested and used, including requirements for the premises in which measurement laboratories are located.
Similar content being viewed by others
Literature cited
N. N. Markov et al., Errors and the Selection of Means for Linear Measurements [in Russian], Izd. Mashinostroenie, Moscow (1967).
Yu. S. Mironov, Izmeritel'. Tekh., No. 1 (1968).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 4, pp. 15–17, April, 1969.
Rights and permissions
About this article
Cite this article
Mironov, Y.S. Evaluating resistance to vibration of scale instruments used for linear measurements. Meas Tech 12, 479–482 (1969). https://doi.org/10.1007/BF00985589
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00985589