Conclusions
-
1.
When one coordinate ¯z (pulp and purely pulp paper) is sufficient for characterization of whiteness, the Zeiss leukometer gives reliable results and can be used successfully for evaluating whiteness.
-
2.
Measurement of coordinate ¯y on the leukometer is possible only after installing the combined filter proposed in this article into the instrument.
-
3.
Certification of leukometer standards should be done by measuring the spectrophotometric curves and subsequent calculation of the zonal reflection coefficients, or by means of a checked leukometer.
Similar content being viewed by others
Literature cited
E. N. Yustova, N. I. Kaminskaya, and G. V. Pokrovskaya, Izmeritel'. Tekh., No. 1 (1968).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 2, pp. 61–62, February, 1970.
Rights and permissions
About this article
Cite this article
Kaminskaya, N.I., Kuritskii, A.L., Panova, I.N. et al. Use of a zeiss leukometer for measuring the whiteness of paper. Meas Tech 13, 254–256 (1970). https://doi.org/10.1007/BF00982977
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00982977