Advertisement

Measurement Techniques

, Volume 11, Issue 3, pp 403–404 | Cite as

Increasing the measuring accuracy of inside micrometers

  • Yu. A. Fedukin
Brief Communications and Letters to the Editor
  • 15 Downloads

Conclusions

  1. 1.

    One of the principal sources of error with standard inside micrometers is the thermal deformation of the pipe and of the rod.

     
  2. 2.

    The micrometer must not be touched by hand, either during the measurement or when it is carried.

     
  3. 3.

    Micrometers of the design described above should be used for increasing the accuracy in checking openings.

     

Keywords

Physical Chemistry Analytical Chemistry Principal Source Thermal Deformation Check Opening 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Copyright information

© Consultants Bureau 1968

Authors and Affiliations

  • Yu. A. Fedukin

There are no affiliations available

Personalised recommendations