Abstract
A method and test setup are described for the reproduction of a unit beam of pulsed light. After modernization of the existing measurement procedure, various aspects of the method are presented.
Similar content being viewed by others
References
GOST 8.538-85, GSI. Federal standard and federal test procedure for the measurement of pulsed optical beams in the wavelength range 0.5 to 1.6 μm.
USSR Author's Certificate No. 1364902, A. Kh. Zabrodskii and L. S. Lovinskii, Otkrytiya. Izobreteniya, No. 1, 52 (1988).
GOST 8.273-78, GSI. Federal standard and federal test procedure for the measurement of optical beams at 10−6 to 10−2 W in the wavelength range 0.4 to 1.4 μm.
S. G. Guminetskii et al., Opt. Spectrosk.,46, No. 3, 515 (1979).
L. S. Lovinskii and V. I. Sorokin, Izmer. Tekh., No. 10, 20 (1992).
V. Ya. Koval'ski and L. S. Lovinskii, Izmer. Tekh., No. 2, 22 (1991).
S. G. Guminetskii et al., Opt.-mekh. Promysh., No. 2, 19 (1990).
L. S. Lovinskii, Izmer. Tekh., No. 8, 32 (1992).
S. G. Guminetskii and L. S. Lovinskii, All-Union Sci.-Tech. Conf. “Photometry and its Metrological Certification,” Thesis Rep. 8, Moscow, 51 (1990).
S. G. Guminetskii and L. S. Lovinskii, All-Union Sci.-Tech. Conf. “Photometry and its Metrological Certification,” Thesis Rep. 8, Moscow, 51 (1990).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 9, pp. 35–36, September, 1994.
Rights and permissions
About this article
Cite this article
Lovinskii, L.S. Construction and modernization of a federal standard for the measurement of pulsed quasi-monochromatic light beams. Meas Tech 37, 1033–1035 (1994). https://doi.org/10.1007/BF00980132
Issue Date:
DOI: https://doi.org/10.1007/BF00980132