Conclusions
The combined method of comparing frequencies is suitable for determining an oscillator's frequency with a fractional ratio to the reference frequency, consisting of two large numbers, and for determining the difference frequency and its sign (especially with a relatively large difference frequency or a complicated figure). This method makes inexpedient the use of the more complicated and less convenient elliptical scanning method [1, 10], which must have a buffer stage to decouple the two oscillators, and cannot be used for comparing frequencies of low voltages. The multiline divided figures can be used similarly to the multiline figures in elliptical scanning [10].
Similar content being viewed by others
Literature cited
J. F. Rider and S. D. Uslan, Encyclopedia on Cathode-Ray Oscilloscopes and Their Uses (New York, 1950).
T. W. R. East and A. F. Standing, J. of Sci. Instr.26, No. 7 (1949).
F. J. M. Laver, Post Office Electr. Engr's Journ. Pt II42, (1949).
V. L. Lassan, “Methods of sorting and maintaining a unit of frequency by means of a group of standard oscillators,” Dissertation [in Russian] (VNIIM, Leningrad, 1951).
R. Guillien, Annales Universitatis Saraviensis1 (1952).
W. Bader, Archiv, für Elektrotechnik39, Nos. 2–3 (1948).
A. I. Fyurstenberg, Radiotekhnika12, 12 (1957).
A. I. Fyurstenberg, Doklady Akad. Nauk123, 2 (1958).
R. Walter, Techn. Hausmitt. Nordwestdtsch. Rundfunks3, Nos. 10–11 (1951).
A. I. Fyurstenberg, Uspekhi Fiz. Nauk68, 2 (1959).
Rights and permissions
About this article
Cite this article
Fyurstenberg, A.I. A combined oscillographic method for comparing frequencies. Meas Tech 3, 151–154 (1960). https://doi.org/10.1007/BF00979052
Issue Date:
DOI: https://doi.org/10.1007/BF00979052