Summary
The testing of the model has shown that the instrument operates reliably and provides resistance measurements in the range of 0–100 ohm with an error of 0.2 ohm.
It should be noted that, with a small internal resistance of the bridge supply source, the reactance of the measured resistances has no effect on the measurement results, since during balancing the current in the bridge arm containing R1 is not changed.
The above investigation can be used for designing and mass production of miniature automatic transistorized digital-display ohmmeters.
Similar content being viewed by others
Rights and permissions
About this article
Cite this article
Malinovskii, V.N., Kharchenko, R.R. Digital display transistorized bridge. Meas Tech 3, 961–965 (1960). https://doi.org/10.1007/BF00977522
Issue Date:
DOI: https://doi.org/10.1007/BF00977522