Abstract
A classification of a priori information on reliability is presented. Models for conversion of the results of determinative and alternate criterion product testing for use in unifying these results with those of acceptance tests are considered. The models are intended to ensure that constraints on customer risk are observed.
Similar content being viewed by others
References
V. A. Lapidus et al., Statistical Quality Control of Production on the Basis of the Principle of Distribution of Priorities [in Russian], Finansy i Statistika, Moscow (1991).
R. S. Sudakov, Testing Engineering Systems. The Selection of Volumes and Duration [in Russian], Mashinostroenie, Moscow (1988).
N. N. Radaev, Izmer. Tekh., No. 12, 14 (1994).
V. P. Savchuk, Bayesian Methods of Statistical Estimation. Reliability of Industrial Plants [in Russian], Nauka, Moscow (1989).
L. A. Leifer, Engineering Methods of Experimental Estimation of the Reliability of High-Reliability Systems [in Russian], Znanie, Moscow (1982), p. 55.
V. A. Prokhorenko and V. F. Golikov, Incorporatinga priori Information in Reliability Estimation [in Russian], Nauka i Tekhnika, Minsk (1979).
All-Union State Standard 27.001-81. Reliability in Engineering (Standards System). Basic Assumptions.
R. S. Sudakov (ed.), Statistical Problems in Completing Systems and Tables for Numerical Calculations of Reliability Indicators [in Russian], Vysshaya Shkola, Moscow (1975).
N. N. Radaev, Vestn. Mashinostr., No. 8, 6 (1993).
F. I. Kuz'min, Maintaining the Reliability of Engineering Systems [in Russian], Radio i Svyaz', Moscow (1982).
E. V. Dzirkal, Tekh. Kibern., No. 2, 109 (1982).
N. N. Radaev, Avtom. Telemekh., No. 4 (1994).
N. N. Radaev, Izmer. Tekh., No. 8, 17 (1993).
N. N. Radaev, Nadezhn. Kontr. Kachest, No. 12, 27 (1992).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 1, pp. 10–13, January, 1995.
Rights and permissions
About this article
Cite this article
Radaev, N.N. Models for conversion of preliminary information for use in unifying this information with the results of acceptance tests performed using an alternate criterion. Meas Tech 38, 14–20 (1995). https://doi.org/10.1007/BF00976739
Issue Date:
DOI: https://doi.org/10.1007/BF00976739