Literature cited
A. D. Rubinov, Control of Large Dimensions in Engineering: A Handbook [in Russian], Mashinostroenie, Leningrad (1982).
B. K. Makarevich and N. I. Novikov, Vzaimozamenyaemost' Tekh. Izmer. Mashinostr., No. 2, 339 (1960).
H. Leitz, VDL, No. 472, 11 (1983).
USSR State Standard GOST 8.051-73. GSI: Errors Admissible in Measurement of Linear Dimensions from 1 to 500 mm.
Technical Regulation RTM 108.004.56-80. Choice and Purpose of Measurement Devices for Linear Dimensions and Deviations from Linearity and Planarity.
S. G. Rabinovich, Measurement Errors [in Russian], énergiya, Leningrad (1978).
Ya. B. Shor, Statistical Methods of Analysis and Quality and Reliability Control [in Russian], Sovetskoe Radio, Moscow (1962).
Industrial Manual RD 50-453-84. Methodological Guide: Characteristics of Errors of Measurement Devices in Real Operating Conditions: Evaluation Methods.
USSR State Standard GOST 10529-86. Theodolites: General Specifications.
A. K. Kutai, Precision and In-Process Control in Engineering [in Russian], Mashinostroenie, Leningrad (1983).
L. K. Kayak, Issled. Obl. Lineinykh Izmer., Issue 12, No. 72, 87 (1951).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 5, pp. 8–10, May, 1991.
Rights and permissions
About this article
Cite this article
Magdeev, V.S. Error in the measurement of the coordinates of surface points of large components with two theodolites. Meas Tech 34, 438–440 (1991). https://doi.org/10.1007/BF00975254
Issue Date:
DOI: https://doi.org/10.1007/BF00975254