Abstract
A tantalum nitride phase with the WC-type structure which formerly was believed to be TaN0.8–0.9 has been re-detected. This phase is formed preferentially by nitriding tantalum metal powder with ammonia gas at 850° to 1200° C, the reaction products, however, always containing additionally other tantalum nitrides (Ta2N, ε-TaN, Ta5N6). Though this phase, called ϑ-TaN, could not be prepared free from other tantalum nitrides, it could be proved to have a composition corresponding to TaN1.0. The phase seems to have no homogeneity range if prepared free from contamination with other elements.
Zusammenfassung
Eine früher als TaN0.8–0.9 beschriebene Tantalnitridphase mit einer Kristallstruktur vom WC-Typ konnte wieder aufgefunden werden. Sie entsteht vorzugsweise beim Nitridieren von Tantalmetallpulver mit NH3-Gas bei 850 bis 1200° C, jedoch stets nur im Gemisch mit anderen Tantalnitriden (Ta2N, ε-TaN, Ta5N6).Obgleich eine Reindarstellung dieser als ϑ-TaN bezeichneten Phase nicht gelang, konnte indirekt ihre chemische Zusammensetzung mit Sicherheit als der Formel TaN1.0 entsprechend festgestellt werden. Ein Homogenitätsgebiet meßbarer Breite scheint die Verbindung ϑ-TaN nicht zu haben, wenn sie frei von Verunreinigungen fremder Elemente ist.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Herrn Prof. Dr.H. Nowotny gewidmet.
Rights and permissions
About this article
Cite this article
Brauer, G., Mohr-Rosenbaum, E. Über Tantalnitride mit der Zusammensetzung TaN1.0 . Monatshefte für Chemie 102, 1311–1316 (1971). https://doi.org/10.1007/BF00917186
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00917186