Literature cited
G. I. Taylor, “The use of flat-ended projectiles for determining dynamic yield stress,” Proc. Royal Soc.,3, A 194 (1948).
M. L. Wilkins and M. W. Guinan, “impact of a cylinder onto a rigid wall,” Mekhanika, No. 3 (1973).
I. E. Khorev and V. A. Gorel'skii, “Axially-symmetric spall in problems of broad-range interaction of solids,” Dokl. Akad. Nauk SSSR,271, No. 3 (1983).
G. R. Johnson, “Analysis of elastic-plastic impact involving severe distortions,” J. Appl. Mech.,43, No. 3 (1976).
I. E. Khorev and V. A. Gorel'skii, “Numerical modeling of spall fractures during axiallysymmetric interaction of solids,” in: Detonation Materials. Second All-Union Conference on Detonation [in Russian], Chernogolovka (1981).
G. V. Stepanov, Elastic-Plastic Deformation of Materials under the Action of Impulsive Loads [in Russian], Naukova Dumka, Kiev (1979).
G. I. Kanel' and A. N. Dremin, “Experimental study and numerical modeling of the evolution of an impulse of compression and of the phenomenon of spall in iron,” in: Thesis Reports. All-Union Symposium on Impulsive Pressures [in Russian], Moscow (1979).
G. I. Kanel' and V. V. Shcherban', “Plastic deformation and spall fracture of ‘Armco’ iron in a shock wave,” Fiz. Goreniya Vzryva, No. 4 (1980).
Author information
Authors and Affiliations
Additional information
Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 1, pp. 161–163, January–February, 1986.
Rights and permissions
About this article
Cite this article
Bogomolov, A.N., Gorel'skii, V.A., Zelepugin, S.A. et al. Behavior of bodies of revolution in dynamic contact with a rigid wall. J Appl Mech Tech Phys 27, 149–152 (1986). https://doi.org/10.1007/BF00911139
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00911139