Soviet Physics Journal

, Volume 24, Issue 2, pp 127–131 | Cite as

Influence of grain size on strain hardening of orderable Ni3Fe alloy

  • S. P. Zhukovskii
  • N. A. Koneva
  • V. S. Kobytev
  • É. V. Kozlov


An experimental study was made of the strain hardening of the Ni3Fe alloy in disordered and ordered states as a function of the grain size. An analysis of the stress-strain diagrams was made using the Hall-Petch equation allowing for the contributions of the density of statistically stored dislocations ρs and the density of geometrically expected dislocations ρg to the total dislocation density ρ.


Grain Size Experimental Study Dislocation Density Strain Hardening Ni3Fe 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    W. G. Johnston and J. J. Gilman, Philos. Mag.,12, 305 (1965).Google Scholar
  2. 2.
    L. E. Popov, É. V. Kozlov, N. A. Aleksandrov, and S. G. Shtein, Fiz. Met. Metalloved.,21, 920 (1966).Google Scholar
  3. 3.
    N. S. Stoloff and R. G. Davies, Prog. Mater. Sci.,13, 49 (1966).Google Scholar
  4. 4.
    M. Victoria and A. E. Vidoz, Phys. Status Solidi,28, 131 (1968).Google Scholar
  5. 5.
    A. C. Arco and Y. H. Liu, Metall. Trans.,2, 1875 (1971).Google Scholar
  6. 6.
    E. M. Schulson, J. Nucl. Mater.,57, 98 (1975).Google Scholar
  7. 7.
    S. M. L. Sastry, Mater. Sci. Eng.,22, 198 (1976).Google Scholar
  8. 8.
    E. M. Schulson and J. A. Roy, Acta Metall.,26, 15 (1978).Google Scholar
  9. 9.
    E. M. Schulson and J. A. Roy, Acta Metall.,26, 29 (1978).Google Scholar
  10. 10.
    E. O. Hall, Proc. Phys. Soc. London Sect. B64, 747 (1951).Google Scholar
  11. 11.
    N. I. Petch, J. Iron Steel Inst.,174, 25 (1953).Google Scholar
  12. 12.
    M. F. Ashby, Philos. Mag.,21, 399 (1970).Google Scholar
  13. 13.
    M. F. Ashby, in: Strengthening Methods in Crystals (eds. A. Kelly and R. B. Nicholson), Applied Science Publishers, London (1971), p. 261.Google Scholar
  14. 14.
    N. Hansen, Acta Metall.,25, 83 (1977).Google Scholar
  15. 15.
    A. W. Thompson, M. I. Baskes, and W. F. Flanagan, Acta Metall.,21, 1017 (1973).Google Scholar
  16. 16.
    A. W. Thompson, Acta Metall.,25, 83 (1977).Google Scholar
  17. 17.
    E. V. Kozlov, A. S. Tailashev, D. M. Shtern, and A. A. Klopotov, Izv. Vyssh. Uchebn. Zaved. Fiz., No. 5, 32 (1977).Google Scholar
  18. 18.
    U. F. Kocks, Y. Nakada, and B. Ramaswami, Trans. AIME,230, 1006 (1964).Google Scholar
  19. 19.
    L. E. Popov and N. A. Koneva, Izv. Vyssh. Uchebn. Zaved. Fiz., No. 8, 132 (1976).Google Scholar
  20. 20.
    Yu. P. Sharkeev, É. V. Kozlov, and N. A. Koneva, Proc. All-Union Seminar on Strain Hardening of Steels and Alloys [in Russian], Tomsk State University (1980).Google Scholar
  21. 21.
    L. E. Popov and É. V. Kozlov, Mechanical Properties of Ordered Solid Solutions [in Russian], Metallurgiya, Moscow (1970).Google Scholar
  22. 22.
    G. I. Taylor, Proc. R. Soc.,145, 362 (1934).Google Scholar

Copyright information

© Plenum Publishing Corporation 1981

Authors and Affiliations

  • S. P. Zhukovskii
    • 1
  • N. A. Koneva
    • 1
  • V. S. Kobytev
    • 1
  • É. V. Kozlov
    • 1
  1. 1.Structural Engineering InstituteTomsk

Personalised recommendations