Advertisement

Soviet Applied Mechanics

, Volume 15, Issue 12, pp 1193–1200 | Cite as

Fatigue resistance of the elements of spindle joints

  • V. É. Pavlovskii
  • L. V. Konovalov
  • É. Ya. Filatov
  • V. A. Popov
Article
  • 15 Downloads

Keywords

Fatigue Fatigue Resistance 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature Cited

  1. 1.
    S. S. Danilov, “Statics of the universal spindle of a rolling mill,” in: Proceedings of the First All-Union Conference on Calculation of the Strength of Metallurgical Machines, Kolpino, 1966, Izd. VNIIMETMash., Vol. 2, No. 24, Moscow (1969), pp. 51–59.Google Scholar
  2. 2.
    L. V. Konovalov, “Determination of calculated loads with evaluation of the strength of assemblies and parts of the main line of shaping machines,” in: Proceedings of the VNIIMETMASh, No. 44, Moscow (1976), pp. 19–27.Google Scholar
  3. 3.
    L. V. Konovalov, “Statistical method for determining the torques in the spindles of rolling machines taking account of the redistribution of the rolling moment,” in: Proceedings of the VNIIMETMASh, No. 49, Moscow (1977), pp. 62–68.Google Scholar
  4. 4.
    M. É. Garf (editor), Machines and Instruments for Progammed Strength Tests [in Russian], Naukova Dumka, Kiev (1970).Google Scholar
  5. 5.
    V. D. Mekhranov, V. I. Bol'shakov, and V. L. Pavlov, “Dynamics of the clamping of ingots in a blooming mill 1300,” Met. Gornorudn. Prom., No. 3 (63), 24–26 (1970).Google Scholar
  6. 6.
    I. M. Meerovich, Investigation and Calculation of the Universal Spindles of Rolling Mills [in Russian], TsNIITEKhMASh, Nauchn.-Tekh. Inf. 22; Mashgiz, Moscow (1954).Google Scholar
  7. 7.
    R. E. Peterson, Stress Concentration Factors, Wiley (1974).Google Scholar
  8. 8.
    S. V. Serensen, M. É. Garf, and L. A. Kozlov, Machines for Fatigue Tests [in Russian], Mashgiz, Moscow (1957).Google Scholar
  9. 9.
    S. V. Serensen, V. P. Kogaev, and R. M. Shneiderovich Carryin Capacity and Calculations of the Strength of Machine Parts [in Russian], Mashgiz, Moscow (1963).Google Scholar
  10. 10.
    P. Ya. Skichko and A. M. Pukhal'skaya, Proceedings of the Dnepropetrovsk Institute of Ferrous Metallurgy [in Russian], Vol. 31, Metallurgiya, Moscow (1969), pp. 78–85.Google Scholar
  11. 11.
    V. V. Smirnov and R. A. Yakovlev, “Mechanics of the change in the gaps in the joint of a blade-type universal spindle,” Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 3, 180–184 (1975).Google Scholar
  12. 12.
    A. I. Tselikov, Calculation and Construction of Rolling Mills [in Russian], United Scientific and Technical Presses, Moscow-Leningrad (1938).Google Scholar
  13. 13.
    R. Wurzbach, “Die Bemessung von Gelenkspindelköpfen, (1970), pp. 1242–1249.Google Scholar

Copyright information

© Plenum Publishing Corporation 1980

Authors and Affiliations

  • V. É. Pavlovskii
  • L. V. Konovalov
  • É. Ya. Filatov
  • V. A. Popov

There are no affiliations available

Personalised recommendations