Literature Cited
M. Ya. Leonov and N. Yu. Shvaiko, “Complex plane strain,” Dokl. Akad. Nauk SSSR,159, No. 2, 1007–1010 (1964).
W. Prager, Introduction to Mechanics of Continua, Peter Smith.
J. R. Rice, “Localization of plastic strain,” in: Theoretical and Applied Mechanics: Transactions of the XIV International Congress of the IUTAM [Russian translation], Mir, Moscow (1979), pp. 439–471.
Yu. E. Chernyavskii, Yu. A. Chermyakov, and N. Yu. Shvaiko, “Inelastic loss of stability in the torsional mode,” Dopov. Akad. Nauk Ukr. RSR, Ser. A, No. 7, 643–646 (1977).
Yu. A. Chernyakov and N. Yu. Shvaiko, “Bifurcation of the deformation process in complex loading,” Dopov. Akad. Nauk Ukr. RSR, Ser. A, No. 2, 150–153 (1977).
N. Yu. Shvaiko, “Theory of plasticity based on the concept of slip,” Prikl. Mekh.,12, No. 11, 12–24 (1976).
R. Hill, “Some basic principles in the mechanics of solids without of natural time,” J. Mech. Phys. Solids,7, No. 3, 209–225 (1959).
R. Hill and J. W. Hutchinson, “Bifurcation phenomena in the plane tensile test,” J. Mech. Phys. Solids,23, Nos. 4-5, 239–264 (1975).
J. W. Hutchison and V. Tvergaard, “Shear band formation in plane straih,” Rept. Dan. Cent. Appl. Math. and Mech.,186 (1980).
J. R. Rice and J. W. Rudnicki, “A note of some features of the theory of localization of deformation,” Int. J. Solids Struct.,16, No. 7, 597–605 (1980).
J. W. Rudnicki and J. R. Rice, “Condition for the localization of deformation in pressure sensitive dilatant materials,” J. Mech. Phys. Solids,23, No. 6, 371–394 (1975).
M. J. Sewell, “A survey of plastic buckling,” in: Stability, Univ. of Waterloo Press, Ontario (1972), pp. 85–197.
S. Stören and J. R. Rice, “Localized necking in thin sheets,” J. Mech. Phys. Solids,23, No. 6, 421–441 (1975).
Additional information
Dneprodzerzhinsk Industrial Institute. Dnepropetrovsk State University. Translated from Prikladnaya Mekhanika, Vol. 20, No. 12, pp. 85–89, December, 1984.
Rights and permissions
About this article
Cite this article
Chernyavskii, Y.E., Chernyakov, Y.A. Localization of plastic strains in an incompressible strain-hardening medium. Soviet Applied Mechanics 20, 1161–1164 (1984). https://doi.org/10.1007/BF00888970
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00888970