Literature Cited
I. S. Akhmed'yanov and A. P. Rychkov, “Elastoplastic deformation of a spherical shell with axially symmetric loading,” Strength, Stability, and Oscillations of Thin-Walled and Monolithic Aviation Structures [in Russian], Kazan. Aviats. Inst. (1980), pp. 7–13.
A. N. Guz' and A. G. Makarenkov, “Load-carrying capacity of spherical shells with reinforced holes,” Probl. Prochn., No. 4, 59–63 (1970).
A. N. Guz', I. S. Chernyshenko, and K. I. Shnerenko, Spherical End-Plates Weakened by Holes [in Russian], Naukova Dumka, Kiev (1970).
B. I. Zuev, S. A. Kapustin, and L. K. Kiselev, “Combination finite element method for structural analysis,” Prikl. Probl. Prochn. Plastich. No. 3, 41–47 (1976).
Yu. V. Sobolev and E. I. Krasnovskii, “Local loading of a spherical shell with radial pressing by a rigid die,” Stroit. Mekh. Raschet Sooruzh., No. 5, 11–14 (1976).
A. N. Guz' I. S. Chernyshenko, V. N. Chekhov, et al., Theory of Thin Shells Weakened by Holes [in Russian], Naukova Dumka, Kiev (1980) (Shell Design Methods: 5th Vol. Pat. 1).
I. S. Chernyshenko, “Elastoplastic state of a shell of revolution with a rigid circular inclusion,” Prikl. Mekh.,16, No. 2, 57–62 (1980).
I. S. Chernyshenko and V. A. Maksimyuk, “Physically nonlinear deformation of orthotropic shells of revolution,” Prikl. Mekh.22, No. 1, 52–56 (1986).
E. Reissner and I. E. Reissner, “Effects of a rigid circular inclusion on states of twisting and shearing in shallow spherical shells,” Trans. ASME J. Appl. Mech.,49, No. 2, 442–443 (1982).
Additional information
Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Prikladnaya Mekhanika, Vol. 25, No. 1, pp. 66–71, January, 1989.
Rights and permissions
About this article
Cite this article
Chernyshenko, I.S. Nonlinear deformation of isotropic and orthotropic shells with holes reinforced by a rigid elastic element. Soviet Applied Mechanics 25, 54–59 (1989). https://doi.org/10.1007/BF00887317
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00887317