Literature Cited
O. K. Zenkevich, Finite Elements Method in Engineering [Russian translation], Nauka, Moscow (1978).
V. I. Ivanyutenko, A. G. Rafailov, and V. S. Rusetskii, “Strength of bar with a circular hole,” in: Problems of Structural Mechanics and the Strength of Aircraft [in Russian], Mosk. Aviats. Inst., Moscow (1987), pp. 88–94.
V. V. Novozhikov, “Necessary and sufficient condition of technical cohesive strength,” Prikl. Mat. Mekh.,33, No. 2, 212–222 (1969).
V. Z. Parton and E. M. Morozov, Mechanics of Elastoplastic Deformation [in Russian], Nauka, Moscow (1985).
A. G. Rafailov, V. I. Ivanyutenko, and A. P. Zhabin, “Use of the theory of mean stresses to analyze the fracture of a flat specimen with a circular hole,” Submitted to VINITI 25.05.84; No. 3476-84. May (1984).
A. G. Rafailov, V. I. Ivanyutenko, and A. P. Zhabin, “Evaluation of the strength of specimens weakened by a hole with the use of the Neuber criterion,” in: Problems of Structural Mechanics and the Strength of Aircraft [in Russian], Mosk. Aviats. Inst., Moscow (1985).
H. Neuber, “One method of taking into account the stress concentration in computations and design for strength,” J. Construct. Mach.,20, No. 7, 271–274 (1968).
I. T. Oden, “On the calculation of consistent stress distribution in finite element approximations,” Int. J. Num. Meth. Eng., No. 3, 317–325 (1971).
Additional information
Institute of Mechanics of the Ukrainian SSR, Kiev. Moscow Aviation Institute. Translated from Prikladnaya Mekhanika, Vol. 26, No. 2, pp. 113–117, February, 1990.
Rights and permissions
About this article
Cite this article
Ivanvutenko, V.I., Kritsuk, A.A., Rafailov, A.G. et al. Fracture criterion for metal specimens with concentrators based on the theory of mean stresses. Soviet Applied Mechanics 26, 206–210 (1990). https://doi.org/10.1007/BF00887118
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00887118