Literature Cited
O. M. Guz', “Approximate method of determining stress concentration around curvilinear holes in shells,” Prikladna Mekhanika,8, No. 6 (1962).
O. M. Guz', “Stress concentration around an elliptical hole with small eccentricity in a cylindrical shell,” Dokl. Akad. Nauk URSR, No. 10 (1963).
A. I. Lur'e, Statics of Thin-Walled Elastic Shells [in Russian], Gostekhizdat, Moscow (1947).
G. N. Savin, Stress Distribution around Holes in Plates and Shells [in Russian], Naukova Dumka, Kiev (1968).
V. N. Chekhov, “Stress state of a cylindrical shell with a relatively large curvilinear hole,” Prikladnaya Mekhanika,6, No. 6 (1970).
R. S. Tennyson, D. K. Roberts, and D. Zimchik, “Analysis of the stress distribution around unreinforced cutouts in circular cylindrical shells under axial compression,” Annual Progress Report, UTJAS, October (1968).
Additional information
Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Prikladnaya Mekhanika, Vol. 7, No. 11, pp. 41–46, November, 1971.
Rights and permissions
About this article
Cite this article
Chekhov, V.N. Stress distribution in a cylindrical shell with an elliptical hole. Soviet Applied Mechanics 7, 1211–1215 (1971). https://doi.org/10.1007/BF00887084
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00887084