Literature Cited
L. Ya. Ainola and U. K. Nigul, “Wave processes of strain plates and shells,” Izv. Akad. Nauk EstSSR, No. 1 (1965).
O. K. Aksentyan and I. I. Vorovich, “On determining stress concentrations on the basis of an applied theory,” Prikl. Matem. i Mekh.,28, No. 3 (1964).
S. A. Ambartsumyan, Theory of Anisotropic Shells [in Russian], Fizmatgiz, Moscow (1961).
S. A. Ambartsumyan, Theory of Anisotropic Plates [in Russian], Nauka, Moscow (1967).
I. I. Vorovich, “Certain stress concentration problems,” in: Stress Concentration [in Russian], No. 2, Naukova Dumka, Kiev (1967); No. 3, Naukova Dumka, Kiev (1971).
A. N. Guz', “On an approximate method of determining stress concentrations close to holes in shells,” Prikladna Mekhanika,8, No. 4 (1962).
A. N. Guz' and K. I. Shnerenko, “Stress concentrations in shells made from a material with a low shear modulus,” Prikladnaya Mekhanika,6, No. 8 (1970).
L. V. Kantorovich and V. N. Krylov, Approximate Methods of Higher Analysis [in Russian], Fizmatgiz, Moscow-Leningrad (1962).
A. V. Kolos, “On improving the classical theory of flexure of circular plates,” Prikl. Matem. i Mekh.,28, No. 3 (1964).
A. Kratzer and W. Franz, Transcendental Functions [Russian translation], IL, Moscow (1963).
E. I. Lun' and B. L. Pelekh, “On the static-geometrical analogy and complex equations of a shell theory of the Timoshenko type,” Mekhanika Polimerov, No. 5 (1969).
E. I. Lun' and A. A. Syas'kii, “Determining the elastic state in shells with a reinforced boundary,” Proceedings of the First Republic Conference of Young Scientists on the Mechanics of Deformable Solids [in Russian], Kiev (1969).
Yu. N. Nemish and B. L. Pelekh, “On the analogy between the theory of flexure of plates of the type of S. P. Timoshenko and the plane problem of the moment theory of elasticity,” Prikladnaya Mekhanika,5, No. 4 (1969).
Yu. N. Nemish and B. L. Pelekh, “Flexure of transversely isotropic plates with curvilinear inclusions,” Prikladnaya Mekhanika,6, No. 1 (1970).
Yu. N. Nemish, B. L. Pelekh and I. Yu. Khoma, “Flexure of transversely isotropic plates with curvilinear holes,” Prikladnaya Mekhanika,5, No. 10 (1969).
B. L. Pelekh, “Determining stress concentration factors near holes in plate flexure,” Prikladnaya Mekhanika,1, No. 7 (1965).
B. L. Pelekh, “Investigating stress concentrations near holes in plate flexure,” in: Stress Concentrations [in Russian], No. 1, Naukova Dumka, Kiev (1965).
B. L. Pelekh, “Certain problems of flexure of transversely isotropic plates weakened by circular holes,” Izv. Akad Nauk ArmSSR, Mekhanika, No. 5 (1969).
B. L. Pelekh, “On solving plate flexure problems in the case of multiply connected regions,” Prikladnaya Mekhanika,5, No. 9 (1969).
B. L. Pelekh, “Flexure of an infinite, transversely isotropic plate weakened by a finite number of circular holes,” Izv. Akad. Nauk ArmSSR, Mekhanika, No. 1 (1970).
B. L. Pelekh, “Certain problems of theory and calculation of anisotropic shells and plates with a low shear stiffness,” Mekhanika Polimerov, No. 4 (1970).
B. L. Pelekh and E. I. Lun', “Stress concentration near holes in transversely isotropic shells,” Mekhanika Polimerov, No. 6 (1970).
B. L. Pelekh and E. I. Lun', “The static-geometrical analogy and a method of complex transformation in a theory of shells of the Timoshenko type,” Dokl. Akad. Nauk SSSR,192, No. 6 (1970).
B. L. Pelekh and S. A. Pelekh, “Flexure of an infinite, transversely isotropic plate with a cemented-in disk of another material,” Izv. ArmSSR, Mekhanika, No. 6 (1969).
D. V. Peshtmaldzhyan and A. A. Khachatryan, “Flexure of a transversely isotropic plate with a circular hole,” Izv. Akad. Nauk ArmSSR, No. 5 (1969).
G. N. Savin, Stress Concentrations near Holes [in Russian], GITTL, Moscow (1951).
G. N. Savin, “Stress distribution in a thin shell weakened by a hole,” in: Problems of Mechanics of Solids [in Russian], Izd. Akad. Nauk SSSR, Moscow (1961).
G. N. Savin, Foundations of the Plane Problem of the Moment Theory of Elasticity [in Russian], Izd. KGU, Kiev (1965).
G. N. Savin, Stress Distribution near Holes [in Russian], Naukova Dumka, Kiev (1968).
G. N. Savin and A. N. Guz', “On the stress state near curvilinear holes in shells,” Izv. SSSR, Mekhanika i Mashinostroenie, No. 6 (1964).
Yu. M. Tarnopol'skii and A. V. Roze, Special Features of Calculation of Components Made of Reinforced Plastics [in Russian], Zinatne, Riga (1969).
N. P. Fleishman and B. L. Pelekh, “On the problem of completely eliminating stress concentrations near holes in shells,” in: Stress Concentration [in Russian], No. 1, Naukova Dumka, Kiev (1965).
M. P. Sheremet'ev and B. L. Pelekh, “On problems of the variational principle in shell theory,” in: Theoretical and Applied Mathematics [in Ukrainian], No. 2, Vid. L'voskogo Un-tu (1963).
K. I. Shnerenko, “Stress concentration near a hole in an orthotropic layered cylindrical shell,” Proceedings of the Third All-Union Symposium on Stress Concentration [in Russian], L'vov (1968).
R. A. Hirshb, “The effect of rigid circular inclusion on bending of elastic plate,” J. Appl. Mech.,19, No. 1 (1962).
P. M. Naghdi, “The effect of elliptic hole on the bending of thick plates,” J. Appl. Mech.,19, No. 1 (1962).
Jacques C. J. Nihoul, “Les placques elastique depaissur modérée. Concentrations de tensions au bord d'un trou ou d'une inclusion selon la théorie de Reissner,” Rev. Soc. Roy. Belge Ingrs. et Industriels, No. 12 (1962).
E. Reissner, “On the theory of bending of elastic plates,” J. Math. Phys.,23 (1944).
E. Reissner, “The effect of transverse shear deformations on the bending of elastic plate,” J. Appl. Mech., 12, No. 1 (1947).
S. P. Timoshenko, “On the correction for shear of the differential equation for transverse vibrations of prismatic bars,” Phil. Mag. Ser.6, 41 (1921).
Additional information
Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Physicomathematical Institute, Academy of Sciences of the Ukrainian SSR, L'vov. Translated from Prikladnaya Mekhanika, Vol. 7, No. 2, pp. 3–11, February, 1971.
Rights and permissions
About this article
Cite this article
Savin, G.N., Pelekh, B.L. Stress concentration near holes in plates and shells, taking account of the phenomena caused by transverse shear strains a review. Soviet Applied Mechanics 7, 117–124 (1971). https://doi.org/10.1007/BF00885969
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00885969