Literature Cited
A. S. Grigor'ev, “The theory of large deformations of shells of revolution,” in: Proceedings of the Seventh All-Union Conference on the Theory of Plates and Shells. Dnepropetrovsk, 1969 [in Russian], Moscow (1970), pp. 38–43.
C. J. Costantino, M. A. Salmon, and N. A. Weil, “Effect of end conditions on the burst strength of finite cylinders,” Trans. Am. Soc. Mech. Eng., J. Appl. Mech., Ser. E,31, No. 3, 97–104 (1964).
N. N. Malinin and Zh. L. Petrosyan, “Large plastic deformations of a circular plane membrane loaded with uniform pressure,” Izv. Vyssh. Uchebn. Zaved., Mashinostr., No. 10, 30–37 (1968).
V. Ol'shak and A. Savchuk, Inelastic Behavior of Shells [Russian translation], Mir, Moscow (1969).
P. Pezhina, Fundamental Problems of Viscoplasticity [Russian translation], Mir, Moscow (1968).
M. A. Rudis, “The bearing strength of shells of revolution under large plastic deformations,” in: Third All-Union Congress on Theoretical and Applied Mechanics. Annotated Report [in Russian], Moscow (1968), p. 259.
M. A. Salmon, “Plastic instability of cylindrical shells with rigid end closures,” Trans. Am. Soc. Mech. Eng., J. Appl. Mech., Ser. E,30, No. 9, 401–409 (1963).
G. A. Smirnov-Alyaev, “Investigation of the plastic deflection of thin plates (membranes) rigidly embedded along a contour, when acted upon by a hydrostatic pressure,” in: Investigations on the Theory of Plasticity [in Russian], No. 3, Leningrad, Moscow (1939).
W. Prager, “Finite plastic deformations,” in: F. Eirich (editor), Rheology: Theory and Applications, Vol. 1, New York (1956), pp. 63–69.
H. Weiss and W. Prager, “The bursting speed of rotating disks,” J. Aeron. Sci.,21, No. 3, 23–39 (1954).
Additional information
Voronezh. Translated from Prikladnaya Mekhanika, Vol. 17, No. 1, pp. 86–92, January, 1981.
Rights and permissions
About this article
Cite this article
Misevich, Y.M., Rudis, M.A. Large plastic deformations of circular plane membranes under static and dynamic loads. Soviet Applied Mechanics 17, 70–74 (1981). https://doi.org/10.1007/BF00885649
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00885649