Advertisement

Soviet Applied Mechanics

, Volume 3, Issue 2, pp 1–12 | Cite as

Multiply connected problems of plane elasticity theory: A survey

  • A. S. Kosmodamianskii
Article
  • 48 Downloads

Keywords

Elasticity Theory Plane Elasticity Plane Elasticity Theory 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    O. K. Aksentyan and I. I. Vorovich, “The stress state of a thin slab,” PMM, vol. 27, no. 6, 1963.Google Scholar
  2. 2.
    O. K. Aksentyan and I. I. Vorovich, “Determining stress concentrations on the basis of engineering theory,” PMM, vol. 28, no. 3, 1964.Google Scholar
  3. 3.
    Z. G. Aliev, “The stress state of a square plate near a hole due to uniformly distributed pressure,” Uch. zap. Kom-ta vyssh. i sredn. spets, obrazovaniya Sov. Min. AzSSR, Mekhan., mashinostr., energ., elektrotekhn., avtomatiz., vychisl. tekhn., no. 1, 1965.Google Scholar
  4. 4.
    I. Ya. Amiro, “Using the method of nets to solve the plane problem of elasticity theory for multiply connected domains”, Sb. tr. In-ta stroit. mekhaniki AN USSR, no. 19, 1954.Google Scholar
  5. 5.
    I. G. Aramanovich, “The stress distribution in an elastic half-plane weakened by a reinforced round hole,” DAN SSSR, vol. 104, no. 3, 1955.Google Scholar
  6. 6.
    I. G. Aramanovich, “The problem of die stamp pressure on an elastic half-plane with a round hole,” DAN SSSR, vol. 112, no. 4, 1957.Google Scholar
  7. 7.
    M. O. Basheleishvili, “A method of investigating some plane boundary value problems of an anisotropic elastic body for multiply connected domains,” Trudy VTs AN Gruz SSR, no. 4, 1964.Google Scholar
  8. 8.
    S. M. Belonosov, “A method of solving plane static problems of elasticity theory for doubly connected domains,” Sibirsk. matem. zhurnal, vol. 2, no. 3, 1961.Google Scholar
  9. 9.
    S. M. Belonosov, Basic Plane Static Problems of Elasticity Theory for Simply and Multiply Connected Domains [in Russian], Izd. Sibirsk. otd. An SSSR, 1962.Google Scholar
  10. 10.
    V. M. Buivol, “The biharmonic problem for multiply connected cyclically symmetric systems,” Prykladna mekhanika, vol. 5, no. 3, 1959.Google Scholar
  11. 11.
    V. M. Buivol, “Applications of the method of successive approximations to the plane problem for certain multiply connected domains,” Prykladna mekhanika, vol. 7, no. 6, 1961.Google Scholar
  12. 12.
    V. M. Buivol, “The effect of concentrated forces on a perforated plate,” Prykladna mekhanika, vol. 8, no. 1, 1962.Google Scholar
  13. 13.
    G. N. Bukharinov, “A plate weakened by round holes,” in collection: Proceedings of the Conference on Optical Stress Analysis [in Russian], Moscow-Leningrad, 1937.Google Scholar
  14. 14.
    D. V. Vainberg, The Stress State of Composite Disks and Plates [in Russian], Izd-vo AN USSR, Kiev, 1952.Google Scholar
  15. 15.
    D. V. Vainberg and V. M. Agranovich, “The stress states of certain multiply connected bodies,” DAN URSR, no. 1, 1959.Google Scholar
  16. 16.
    D. V. Vainberg and O. L. Sinyavs'kii, “Stress concentrations in disks with holes of special shapes,” DNA URSR, no. 10, 1960.Google Scholar
  17. 17.
    G. A. Van Fo Fy, “A solution of a plane biperiodic problem of elasticity theory,” DAN URSR, no. 9, 1965.Google Scholar
  18. 18.
    I. I. Vorovich and A. S. Kosmodamianskii, “The elastic equilibrium of an isotropic plate weakened by a row of equal curvilinear holes,” Izv. AN SSSR, OTN, Mekhanika i mashinostroenie, no. 4, 1959.Google Scholar
  19. 19.
    A. Ya. Gorgidze, “The method of successive approximations applied to the plane problem of elasticity theory,” DAN SSSR, vol. 4, no. 5, 6, 1934.Google Scholar
  20. 20.
    A. Ya Gorgidze, “An application of the method of successive approximations in elasticity theory,” Tr. Tbilisskogo matem. in-ta, vol. 4, 1938.Google Scholar
  21. 21.
    A. N. Guz, Author's abstract of doctoral thesis: Thin Elastic Perforated Shells [in Russian], Kiev, 1965.Google Scholar
  22. 22.
    V. M. Gur'yanov and A. S. Kosmodamianskii, “The stress state of an isotropic plate weakened by a curvilinear hole”, Inzhenernyi zhurnal, vol. 4, no. 3, 1964.Google Scholar
  23. 23.
    V. M. Gur'yanov and A. S. Kosmodamianskii, “Extension of an isotropic plate with two elliptical holes,” Sb. Saratovskogo un-ta po probleme kontsentratsii napryazhenii, no. 2, 1965.Google Scholar
  24. 24.
    A. L. Gol'denveizer, “Constructing an approximate theory of plate bending by asymptotic integration of elasticity theory equations,” PMM, vol. 26, no. 4, 1962.Google Scholar
  25. 25.
    G. Yu. Dzhanelidze, “Problems of the theory of elasticity of anisotropic media which are reducible to plane problems,” in collection: Problems of Mechanics of Continuous Media [in Russian], Izd-vo AN SSSR, 1961.Google Scholar
  26. 26.
    M. I. Dlugach, The Method of Nets in the Mixed Plane Problem of Elasticity Theory [in Russian], Izd-vo AN USSR, Kiev, 1964.Google Scholar
  27. 27.
    A. I. Kalandiya, “Bending of an elastic plate in the shape of an elliptical ring,” PMM, vol. 27, no. 6, 1953.Google Scholar
  28. 28.
    L. N. Kisler, “Stresses in a ponderable halfplane weakened by two asymmetrically situated holes,” Izv. AN SSSR, OTN, Mekhanika i mashinostroenie, no. 3, 1960.Google Scholar
  29. 29.
    L. N. Kisler, “Determining the stress field in a ponderable half-plane with elliptical and round holes,” Izv. AN SSSR, OTN, Mekhanika i mashinostroenie, no. 2, 1961.Google Scholar
  30. 30.
    L. N. Kisler, “A study of the interaction of two parallel reinforced tunnels,” in collection: Mathematical Methods in Mining, Part 2 [in Russian], Novosibirsk, 1963.Google Scholar
  31. 31.
    V. T. Koiter, “An infinite row of parallel cracks in an unbounded elastic plate,” in collection: Problems of Mechanics of Continuous Media [in Russian], Izd-vo AN SSSR, Moscow, 1961.Google Scholar
  32. 32.
    A. S. Kosmodamianskii, “Bending of an anisotropic beam under a distributed load,” Inzhenernyi zhurnal, vol. 23, 1956.Google Scholar
  33. 33.
    A. S. Kosmodamianskii, “An approximate method of determining the stress state of an anisotropic mass with two equal elliptical workings, “in collection: Collected Papers on Rock Pressure [in Russian], Gosgortekhizdat, Moscow, 1960.Google Scholar
  34. 34.
    A. S. Kosmodamianskii, “An approximate method of determining the stress state of an anisotropic plate with an infinite number of round holes,” Izv. AN SSSR, OTN, Mekhanika i mashinostroenie, no. 2, 1960.Google Scholar
  35. 35.
    A. S. Kosmodamianskii, “The elastic equilibrium of an anisotropic plate with a finite number of elliptical holes”, Izv. AN ArmSSR, seriya fiz.-matem. nauk, vol. 13, no. 6, 1960.Google Scholar
  36. 36.
    A. S. Kosmodamianskii, “The stress state of an elastic isotropic mass with workings of circular cross section,” in collection: Collected Papers on Rock Pressure, vol. 42 [in Russian], Leningrad, 1961.Google Scholar
  37. 37.
    A. S. Kosmodamianskii, “The stress state of an anisotropic plate with two unequal holes, “Izv. AN SSSR, Mekhanika i mashinostroenie, no. 1, 1961.Google Scholar
  38. 38.
    A. S. Kosmodamianskii, “The stress state of an isotropic plate weakened by a finite number of infinite rows of round holes,” DAN URSR, no. 11, 1961.Google Scholar
  39. 39.
    A. S. Kosmodamianskii, “An elasticoplastic problem for an isotropic mass weakened by an infinite row of equal workings of circular cross section,” Izv. AN SSSR, OTN, Mekhanika i mashinostroenie, no. 4, 1961.Google Scholar
  40. 40.
    A. S. Kosmodamianskii, “The elastic equilibrium of an isotropic plate weakened by a finite number of curvilinear holes,” Prykladna mekhanika, vol. 7, no. 6, 1961.Google Scholar
  41. 41.
    A. S. Kosmodamianskii, “Torsion and bending of cavity-containing orthotropic rods by an orthotropic force,” Izv. AN ArmSSR, vol. 15, no. 3, 1962.Google Scholar
  42. 42.
    A. S. Kosmodamianskii, “The stress state of an anisotropic plate with two infinite rows of elliptical holes,” Inzhenernyi zhurnal, vol, 2, no. 3, 1962.Google Scholar
  43. 43.
    A. S. Kosmodamianskii, “The stress state of a rock mass weakened by many workings of square cross section,” in collection: Papers on Rock Pressure, vol. 45 [in Russian], Leningrad, 1962.Google Scholar
  44. 44.
    A. S. Kosmodamianskii, “Approximate methods of determining the stress state of an elastic rock mass containing workings of circular cross section,” in collection: Papers on Rock Pressure, vol. 45 [in Russian], Leningrad, 1962.Google Scholar
  45. 45.
    A. S. Kosmodamianskii, “The thermoelastic problem for a cavity-containing cylinder”, Prykladna mekhanika, vol. 8, no. 6, 1962.Google Scholar
  46. 46.
    A. S. Kosmodamianskii, “Elastic equilibrium of an anisotropic half-plane weakened by an elliptical hole.” Tr. Gruzinskogo politekhn. in-ta, vol. 8 (93), 1963.Google Scholar
  47. 47.
    A. S. Kosmodamianskii, “The regularity of infinite systems occurring in the investigation of the stress states of elastic media with round holes,” DAN URSR, no. 9, 1964.Google Scholar
  48. 48.
    A. S. Kosmodamianskii, “Extension of an isotropic plate with two unequal curvilinear holes,” in collection: Saratov University Papers on the Stress Concentration Problem, no. 1 [in Russian], 1964.Google Scholar
  49. 49.
    A. S. Kosmodamianskii, “Elastic equilibrium of an isotropic plate with an infinite row of equal round holes filled with elastic cores or reinforced with elastic rings,” in collection: Saratov University Papers on the Stress Concentration Problem, no. 1 [in Russian], 1964.Google Scholar
  50. 50.
    A. S. Kosmodamianskii, “The action of concentrated forces in multiply connected domains,” in collection: Proceedings of the Symposium on the Stress Concentration Problem, no. 1 [in Russian], Kiev, 1965.Google Scholar
  51. 51.
    A. S. Kosmodamianskii, “The quasiregularity of infinite systems in problems on the stress states of anisotropic media with elliptical holes,” Prikladnaya mekhanika, vol. 1, no. 10, 1965.Google Scholar
  52. 52.
    A. S. Kosmodamianskii, “The regularity of the infinite systems occurring in the determination of the stress states of elastic media with round holes,” Izv. AN SSSR, Mekhanika, no. 5, 1965.Google Scholar
  53. 53.
    A. S. Kosmodamianskii, “A new approximate method for determining the stresses in an anisotropic plate with a curvilinear hole,” in collection: Saratov University Papers on the Stress Concentration Problem, no. 2 [in Russian], 1965.Google Scholar
  54. 54.
    S. Kosmodamianskii, “The quasiregularity of infinite systems in the problem of stress concentrations near curvilinear holes,” Prikladnaya mekhanika, vol. 1, no. 1, 1965.Google Scholar
  55. 55.
    A. S. Kosmodamianskii, “The stress state of an isotropic plate weakened by an infinite row of elliptical holes,” Izv. AN SSR, Mekhanika, no. 4, 1965.Google Scholar
  56. 56.
    A. S. Kosmodamianskii, “Determining the stress state of a strongly anisotropic plate with two elliptical holes,” Prykladna mekhanika [Soviet Applied Mechanics], vol. 2, no. 1, 1966.Google Scholar
  57. 57.
    A. S. Kosmodamianskii and V. N. Lozhkin, “Some cases of elastic equilibrium of an isotropic plate with two round holes,” in collection: Saratov University Papers on the Stress Concentration Probtem, no. 2 [in Russian], 1965.Google Scholar
  58. 58.
    A. S. Kosmodamianskii and V. V. Meglinskii, “Extension of an anisotropic plate with elliptical holes reinforced with rigid rings,” in collection: Saratov University Papers on the Stress Concentration Problem, no. 2 [in Russian], 1965.Google Scholar
  59. 59.
    O. M. Kulyk, “Extension of an elastic plane with two unequal round holes reinforced with rigid rings,” Naukovi zapysky Ukr. Poligraf. in-tu, vol. 13, 1961.Google Scholar
  60. 60.
    L. M. Kurshin and L. A. Fil'shtinskii, “Determining the reduced elastic modulus of an isotropic plane weakened by a biperiodic system of round holes,” Izv. AN SSSR, OTN, Mekhanika i mashinostroenie, no. 6, 1961.Google Scholar
  61. 61.
    S. G. Lekhnitskii, Anisotropic Plates [in Russian], Gostekhizdat, Moscow-Leningrad, 1957.Google Scholar
  62. 62.
    V. N. Lozhkin, “Extension of an isotropic plate with two round holes reinforced with rigid rings,” in collection: Saratov University Papers on the Stress Concentration Problem, no. 1 [in Russian], 1964.Google Scholar
  63. 63.
    A. I. Markushevich, Theory of Analytic Functions [in Russian], Gostekhizdat, Moscow-Leningrad, 1950.Google Scholar
  64. 64.
    S. G. Mikhlin, “Applying the method of successive approximations to a biharmonic problem”, Tr. Seismologicheskogo in-ta AN SSSR no. 39, 1934.Google Scholar
  65. 65.
    S. G. Mikhlin, “Stress distribution in a halfplane with an elliptical cutout,” Tr. Seismologicheskogo in-ta AN SSSR, no. 29, 1934.Google Scholar
  66. 66.
    S. G. Mikhlin, Integral Equations [in Russian], Gostekhizdat, Moscow-Leningrad, 1949.Google Scholar
  67. 67.
    P. N. Moshkin, “The problem of an elastic half-plane with one round and one elliptical hole,” Uchenye zapiski Novosibirskogo ped. in-ta, no. 13, 1958.Google Scholar
  68. 68.
    P. N. Moshkin, “The problem of a ponderable elastic half-plane with two elliptical holes,” Uchenye zapiski Novosibirskogo ped. in-ta, no. 13, 1958.Google Scholar
  69. 69.
    N. I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity [in Russian], Izd-vo Nauka, Moscow, 1966.Google Scholar
  70. 70.
    L. N. Nagibin, “Stresses in a ponderable anisotropic half-plane weakened by two round holes,” Inzhenernyi sbornik, vol. 25, 1959.Google Scholar
  71. 71.
    M. Z. Narodetskii, “Determining stresses in a circular ring under concentrated forces,” Izv. AN SSSR, OTN, no. 1, 1948.Google Scholar
  72. 72.
    M. Z. Narodetskii, “Solving problems of plane elasticity theory with the aid of special functions,” DAN SSSR, vol. 114, no. 4, 1957.Google Scholar
  73. 73.
    M. Z. Narodetskii, “A problem in plane elasticity theory which is solvable in closed form,” Soobshch. AN GruzSSR vol. 19, no. 3, 1957.Google Scholar
  74. 74.
    M. Z. Narodetskii, “Stresses in an infinite plate weakened by three round holes,” Soobshch. AN GruzSSR, vol. 34, no. 1, 1964.Google Scholar
  75. 75.
    M. Z. Narodetskii, “Symmetric loading of an infinite plate weakened by three round holes,” Soobshch. AN GruzSSR, vol. 40, no. 2, 1965.Google Scholar
  76. 76.
    P. I. Perlin, “Solving plane problems of elasticity theory for multiply connected domains,” Tr. TsNIITMAsh, no. 3, 1959.Google Scholar
  77. 77.
    P. I. Perlin, “On the properties of the infinite systems of equations occuring in problems of the elasticity theory of doubly connected bodies,” Tr. Moskovskogo fiz.-tekhn. in-ta, no. 5, 1960.Google Scholar
  78. 78.
    P. I. Perlin and L. F. Tolchenova, “Computing the stress states of containers for flat ingots”, Tr. TsNIITMASH, no. 1, 1960.Google Scholar
  79. 79.
    Ya. S. Podstrigach, “Stresses in a plane weakened by unequal round holes”, DAN URSR, no. 6, 1953.Google Scholar
  80. 80.
    Ya. S. Podstrigach, “The action of a concentrated force on the edge of a half-plane with a round hole”, DAN URSR, no. 3, 1954.Google Scholar
  81. 81.
    Ya. S. Podstrigach, “Stresses near two unequal round holes in a plane field”, Nauchnye zapiski In-ta mashinovedeniya i avtomatiki AN USSR, seriya “Mashinovedenie”, vol. 4, no. 3, 1955.Google Scholar
  82. 82.
    I. O. Prusov, “An elastic half-plane with a reinforced round hole”, Nauk. zap. L'vivs'koho derzh. un-tu, vol. 44, no. 8, 1957.Google Scholar
  83. 83.
    V. M. Rakivnenko and V. I. Makhovikov, “Stress concentration near a round hole in a square plate”, DAN URSR, no. 4, 1961.Google Scholar
  84. 84.
    I. V. Rodin, “The effect of round holes on stress distribution in a ponderable half-plane”, Tr. Dal'nevostochnogo politekhn. in-ta, no. 23, 1940.Google Scholar
  85. 85.
    G. N. Savin, “Stresses in an elastic plane with an infinite row of equal cutouts”, DAN SSSR, vol. 23, no. 6, 1939.Google Scholar
  86. 86.
    G. N. Savin, Stress Concentrations Near Holes [in Russian], Gostekhizdat, Moscow-Leningrad, 1951.Google Scholar
  87. 87.
    G. N. Savin, “Stress concentrations near curvilinear holes in plates and shells”, in collection: Stress Concentration, no. 1 [in Russian], Izd-vo Naukova dumka, Kiev, 1965.Google Scholar
  88. 88.
    M. A. Savruk, “Bending of a cantilever with two equal round holes”, Nauchnye zapiski L'vovskogo politekhn. in-ta, no. 29, 1955.Google Scholar
  89. 89.
    M. A. Savruk, “Bending by a constant shearing force of an isotropic beam weakened by two unequal round cutouts”, Nauchnye zapiski L'vovskogo politekhn. in-ta, no. 30, 1955.Google Scholar
  90. 90.
    M. A. Savruk, “The effect of a round hole on the stresses in a half-plane experiencing bending”, Nauchnye zapiski L'vovskogo politekhn. in-ta, no. 30, 1955.Google Scholar
  91. 91.
    M. A. Savruk, “Stress concentration in a thin isotropic strip weakened by two unequal round holes in pure shear”, Prykladna mekhanika, vol. 5, no. 3, 1959.Google Scholar
  92. 92.
    O. M. Sapondzhan, “Applying the Saint-Venant principle to the solution of a problem in elasticity theory”, in collection: Jubilee Collection of Scientific Papers from the Erevan Polytechnic Institute [in Russian], 1960.Google Scholar
  93. 93.
    S. L. Sobolev, “The Schwarz algorithm in elasticity theory”, DAN SSSR, vol. 4, no. 6, 1936.Google Scholar
  94. 94.
    Yu. I. Solov'ev, “The plane problem of elasticity theory for an eccentric ring with a reinforced contour”, Tr. Novosibirskogo in-ta inzhenerov zhel. dor. Transporta, no. 14, 1958.Google Scholar
  95. 95.
    Yu. I. Solov'ev, “The action of a concentrated force on an eccentric ring”, PMM, vol. 22, no. 5, 1958.Google Scholar
  96. 96.
    A. G. Ugodchikov, “Electrically simulated conformal mapping as a means of solving the plane problem of elasticity theory for simply and doubly connected domains”, in collection: Proceedings of the First Interuniversity Conference on Electrical Simulation [in Russian], Novocherkassk, 1960.Google Scholar
  97. 97.
    A. G. Ugodchikov, “Solving the generalized biharmonic problem of plane elasticity theory for doubly connected domains”, Tr. Gor'kovskogo inzhstroit. in-ta, 1961.Google Scholar
  98. 98.
    A. G. Ugodchikov, “Solving the generalized biharmonic problem of plane elasticity theory for doubly connected domains”, DAN URSR, no. 1, 1961.Google Scholar
  99. 99.
    Yu. A. Ustinov, “Stress concentration in a half-plane and in a plane with round holes under tension”, Izv. AN SSSR, Mekhanika, no. 1, 1965.Google Scholar
  100. 100.
    Ya. S. Uflyand, Bipolar Coordinates in the Theory of Elasticity [in Russian], Gostekhizdat, Moscow, 1950.Google Scholar
  101. 101.
    N. N. Fotieva, “Additional stresses arising in the linings of two parallel tunnels when a third tunnel is dug between them”, Fiz.-tekn. problemy razrabotki poleznykh iskopaemykh, Izd. Sibirsk. otd. AN SSSR, no. 4, 1965.Google Scholar
  102. 102.
    N. N. Fotieva, “A study of the additional force factors arising in the linings of two parallel tunnels when a third tunnel is dug between them”, Fiz.-tekhn. problemy razrabotki poleznykh iskopaemykh, Izd. Sibirsk. otd. AN SSSR, no. 5, 1965.Google Scholar
  103. 103.
    L. A. Fil'shtinskii, “Stresses and displacements in an elastic plane weakened by a biperiodic system of equal round holes”, PMM, vol. 28, no. 3, 1964.Google Scholar
  104. 104.
    L. A. Fil'shtinskii, “Heat conduction and thermoelasticity problems for a plane weakened by a biperiodic system of equal round holes”, in collection: Thermal Stresses in Structural Elements, no. 4 [in Russian], Kiev, 1964.Google Scholar
  105. 105.
    D. G. Khlebnikov, “The plane problem for a half-plane reinforced along its edge and weakened by a round hole”, in collection: Problems in the Development of the Natural and Exact Sciences [in Ukrainian], Vyd. L'vi vs'koho derzh. un-tu, 1964.Google Scholar
  106. 106.
    I. Yu. Khoma, “Stress concentration in a thin plate weakened by an infinite number of round holes under elasticoplastic deformations”, in collection: Papers on the Theory of Plates and Shells [in Russian], Erevan, 1962.Google Scholar
  107. 107.
    Ch'eng Ling-hsi, “Stress concentrations in the presence of many holes”, in collection: Problems of the Mechanics of Continuous Media [in Russian], Moscow, 1961.Google Scholar
  108. 108.
    V. A. Shvetsov, “Extension of an isotropic plate with an infinite number of square holes reinforced with rigid rings”, in collection: Saratov University Papers on the Stress Concentration Problem, No. 1 [in Russian], 1964.Google Scholar
  109. 109.
    M. P. Sheremet'ev, “Elastic equilibrium of an elliptical ring”, PMM, vol. 17, no. 1, 1953.Google Scholar
  110. 110.
    D. I. Sherman, “A method for solving certain problems of elasticity theory for doubly connected domains”, DAN SSSR, vol. 55, no. 8, 1947.Google Scholar
  111. 111.
    D. I. Sherman, “Basic plane and contact (mixed) problems of the static theory of elasticity”, in collection: Mechanics in the USSR in the Last Thirty Years [in Russian], Gostekhizdat, Moscow, 1950.Google Scholar
  112. 112.
    D. I. Sherman, “Stresses in a ponderable half-plane weakened by two round holes”, PMM, vol. 15, no. 6, 1951.Google Scholar
  113. 113.
    D. I. Sherman, “Stresses in a plane ponderable medium with two equal symmetrically placed round holes”, PMM, vol. 15, no. 6, 1951.Google Scholar
  114. 114.
    D. I. Sherman, “On the stress states of interstices between cavities (An elastic massy medium weakened by two elliptical holes), Part 1”, Izv. AN SSSR, OTN, no. 6, 1952.Google Scholar
  115. 114a.
    D. I. Sherman, “On the stress states of interstices between cavities (An elastic ponderable medium weakened by two elliptical holes), Part 2”, Izv. AN SSSR, OTN, no. 7, 1952.Google Scholar
  116. 115.
    D. I. Sherman, “A method of solving certain problems of torsion, bending, and plane elasticity theory for multiply connected domains”, Prykladna mekhanika, vol. 3, no. 4, 1957.Google Scholar
  117. 116.
    D. I. Sherman, “On the stress state of a massy half-plane with two deep round holes”, Tr. In-ta fiziki Zemli AN SSSR, vol. 3, 1959.Google Scholar
  118. 117.
    D. I. Sherman, “Stresses in a massy medium weakened by an elliptical and a round hole, Part 1”, Inzhenernyi sbornik, vol. 27, 1960.Google Scholar
  119. 117a.
    D. I. Sherman, “Stresses in a massy medium weakened by an elliptical and a round hole, Part 2”, Inzhenernyi sbornik, vol. 28, 1960.Google Scholar
  120. 118.
    D. I. Sherman, “A massy medium weakny periodically distributed round holes, Part 1”, Inzhenernyi sbornik, vol. 31, 1961.Google Scholar
  121. 119.
    D. I. Sherman, “A massy medium weakened by periodically distributed round and noncircular holes, Part 2”, Inzhenernyi zhurnal, vol. 1, 1962.Google Scholar
  122. 120.
    D. I. Sherman, “An elastic massy half-plane weakened by an elliptical hole situated sufficiently close to its boundary”, in collection: Problems of the Mechanics of Continuous Media [in Russian], Moscow, 1961.Google Scholar
  123. 121.
    D. I. Sherman, “An integral equation method in plane and three-dimensional problems of the static theory of elasticity”, in collection: Proceedings of the All-Union Congress on Theoretical and Applied Mechanics [in Russian], Izd-vo AN SSSR, Moscow, 1962.Google Scholar
  124. 122.
    D. I. Sherman, “Solving the plane problem of elasticity theory for an anisotropic medium”, PMM, vol. 6, 1942.Google Scholar
  125. 123.
    O. I. Shishorina, “Stress concentrations near two equal round holes under tension”, Prykladna mekhanika, vol. 7, no. 4, 1961.Google Scholar
  126. 124.
    R. Bailey and R. Hicks, “Behavior of perforated plates under plane stress”, J. Mech. Engng. Sci., 2, No. 2, 1960.Google Scholar
  127. 125.
    M. Davin, “Etat de contrainte et de deformation d'un certain milieu heterogene indefini a deux dimensions”, Archivum mechaniki stosowanej, 11, 2, 1959.Google Scholar
  128. 126.
    M. Davin, “Etude de la repartition des contraintes et deformations dans un certain milieu heterogene a deux dimensions”, Non-Homogeneity in Elasticity and Plasticity, Pergamon Press, 1959.Google Scholar
  129. 127.
    W. A. Green, G. T. J. Hooper, and R. Hetherington, “Stress distribution in rotating discs with non-central holes”, Aeronaut, Quart., 15, no. 2, 1964.Google Scholar
  130. 128.
    D. P. Gupta, “Stresses due to diametral forces in tension on an eccentric hole of a circular disc”, Z. agnew. Math. und Mech., 40, No. 5, 6, 1960.Google Scholar
  131. 129.
    L. E. Hulbert and F. W. Niedenfuhr, “Accurate calculation of stress distributions in multiholed plates”, Trans. ASME vol. 87, no. 3, 1965.Google Scholar
  132. 130.
    Takuo Hayashi, “On the tension of an orthogonally aeolotropic strip with two circular holes”, Proc. 8th Japan Nat. Congr. Appl. Mech., 1958.Google Scholar
  133. 131.
    R. C. I. Howland, “Stress in a plate containing an infinite row of holes”, Proceedings of the Royal Society of London, Ser. A, vol. 148, 1935.Google Scholar
  134. 132.
    Makoto Isida, “On the tension of a semi-infinite plate with an elliptic hole”, Sci. Papers Fac. Eng., Tokushima Univ., no. 6, 1955.Google Scholar
  135. 133.
    Makoto Isida, “On the tension of an infinite strip containing a square hole with rounded corners”, Bull. ISME, 3, no. 10, 1960.Google Scholar
  136. 134.
    Makoto Isida, “On some plane problems of an infinite plate containing an infinite row of circular holes”, Bull. JSME, 3, no. 10, 1960.Google Scholar
  137. 135.
    Isida Makoto and Sigemi Tagami, “On the tension of an infinite strip containing a hole of an arbitrary profile”, Proc. 9th Japan Nat. Congr. Appl. Mech., 1959.Google Scholar
  138. 136.
    Tomio Itow, “Stress distribution around two parallel tunnels”, Technol. Repts. Osaka Univ., 5, 1955.Google Scholar
  139. 137.
    B. Karunes, “On the concentration of stress round the edge of a hole bounded by two intersecting circles in a large plane”, Indian J. Phys., 27, no. 4, 1953.Google Scholar
  140. 138.
    Takashi Koizumi, “Stresses in a flat-oval tube subjected to internal pressure”, Proc. 10th Japan Nat. Congr. Appl. Mech., 1960.Google Scholar
  141. 139.
    W. T. Koiter, “Some general theorems on doubly-periodic and quasi-periodic functions”, Proc. Kon. Ned. Akad. Wet. Ser. A, vol. 62, no. 2, 1959.Google Scholar
  142. 140.
    W. T. Koiter, “Stress distribution in an infinite elastic sheet with double-periodic set of equal holes”, Boundary Problems in Differential Equations, R. E. Langer, ed., Univ. of Wisconsin Press, Madison, 1960.Google Scholar
  143. 141.
    Toshihiko Kubo, “Stresses on the orthogonally aeolotropic plate with a row of holes”, Proc. 6th Japan Nat. Congr. Appl. Mech., 1956.Google Scholar
  144. 142.
    Toshihiko Kubo, “Stresses on the orthogonally aeolotropic semi-infinite plate containing a circular hole under a bending moment”, Proc. 7th Japan Nat. Congr. Appl. Mech., 1957.Google Scholar
  145. 143.
    Toshihiko Kubo, “Stresses in a semi-infinite plate of orthotropic, elastic material, containing a circular hole with arbitrary forces acting on the periphery”, Proc. 8th Japan Nat. Congr. Appl. Mech., 1958.Google Scholar
  146. 144.
    Chih-bing Ling, “On the Stresses in a Plate Containing Two Circular Holes”, J. of Appl. Phys., vol. 19, no. 1, 1948.Google Scholar
  147. 145.
    Chih-bing Ling, “Stresses in a perforated strip”, J. Appl. Mech., 24, 3, 1957.Google Scholar
  148. 146.
    Chih-bing Ling, “On invariant perforation in an infinite strip”, Paper Amer. Soc. Mech. Engrs. NAPM-20, 1959.Google Scholar
  149. 147.
    Kazyu Miyao, “Stresses in a circular disk with an eccentric circular hole under radial forces”, Bull. JSME, 1, no. 3, 1958.Google Scholar
  150. 148.
    Kyohei Mori, “On the tension of an infinite plate containing two circular holes connected by a slit”, Bull. JSME, 7, no. 28, 1964.Google Scholar
  151. 149.
    Kinichi Nagai, “Stress concentration in a semi-infinite plate containing a circular hole with a flange at the straight edge”, Proc. 7th Japan Nat. Congr. Appl. Mech., 1957.Google Scholar
  152. 150.
    P. P. Radkowski, “Stresses in a plate containing a ring of circular holes and a central circular hole”, Proc. 2nd US. Nat. Congr. Appl. Mech., Ann. Arbor, Mich., New York, 1954.Google Scholar
  153. 151.
    S. K. Roy, “On the stress concentrations for multiple openings in large structures”, Irrigat. and Power, 13, no. 3, 1956.Google Scholar
  154. 152.
    Hideo Saito, “Stress in a plate containing infinite parallel rows of holes”, Z. angew. Math. und Mech., 37, no. 3, 4, 1957.Google Scholar
  155. 153.
    K. S. Schulz, “On the state of stress in perforated strips and plates”, Proc. Koninkl. Nederl. Akad. Wetenschappen, vol. XLV, 3–6, 1942, vol. VLVIII, 1945.Google Scholar
  156. 154.
    Tsuyoshi Sekiya, “An approximate solution of the problems of elastic plates with an arbitrary external form and a circular hole”, Proc. 5th Japan Nat. Congr. Appl. Mech., 1955.Google Scholar
  157. 155.
    A. M. Sengupta, “The effect of two equal circular holes on the stress distribution in a beam under uniform bending moment”, Bull. Calcutta Math. Soc., 45, no. 2, 1953.Google Scholar
  158. 156.
    A. M. Sengupta, “Some problems of elastic plates containing circular holes”, Indian J. Theoret. Phys., 2, no. 1, 1954.Google Scholar
  159. 157.
    A. M. Sengupta, “Stresses due to diametral forces on a circular disk with an eccentric hole”, J. Appl. Mech., 22, no. 2, 1955.Google Scholar
  160. 158.
    F. Szelagowski, “A semi-infinite plate having a rigid circular inclusion and subjected to tension”, Archivum mechaniki stosowanej, 8, no. 4, 1956.Google Scholar
  161. 159.
    T. Jamashida, “On the pure twist of a thin plate containing an infinite row of circular holes”, Z. angew. Math. und Mech., 40, no. 5, 6, 1960.Google Scholar

Copyright information

© The Faraday Press, Inc. 1967

Authors and Affiliations

  • A. S. Kosmodamianskii
    • 1
  1. 1.Donetsk State UniversityDonetskUSSR

Personalised recommendations